MatWeb - Material Property Data 用 MatWeb 登广告!    Register Now
越过59,000 以上, 金属、塑料、陶瓷和合成物的数据资料库。
MatWeb - Material Property Data 主页  •  搜寻  •  工具  •  供应商  •  文件夹  •  有关我们  •  常用问题  •  登录   •  English English English 
  搜寻方法:  高级先进 | 材料类型 | 特性 | 构成份  | 商标  | 制造商
    Search

ZYLAR acrylic copolymers - The Clear Alternative to Polycarbonate and ABS

SABIC Innovative Plastics LEXAN HP2R Polycarbonate (North America)

Return to last searchReturn to last search
Printer friendly version Printer friendly versionAdd to Folder:
Excel Download Download to Excel (requires Excel and Windows)
 Export data to your CAD/FEA program

Subcategory: Polycarbonate; Polymer; Thermoplastic

Close Analogs: Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics.

Material Notes:
Information provided by GE Plastics for their North American product line. MatWeb has a separate entry for the European data sheet.

Physical PropertiesMetricEnglishComments
Density1.2 g/cc0.0434 lb/in³ ASTM D 792
Water Absorption0.15 %0.15 % 24 hours @ 73F; ASTM D 570
Water Absorption at Saturation0.35 %0.35 % Equilibrium, 73F; ASTM D 570
Water Absorption at Saturation0.58 %0.58 % Equilibrium, 212F; ASTM D 570
Linear Mold Shrinkage0.005 - 0.007 cm/cm0.005 - 0.007 in/in Flow, 0.125 inch; ASTM D 955
Melt Flow17.5 g/10 min17.5 g/10 min 300C/1.2 kgf (O); ASTM D 1238
Melt Flow21 g/10 min21 g/10 min Melt Volume Rate, MVR at 300C/1.2 kg; cm3/10min; ISO 1133

Mechanical Properties
Hardness, Rockwell M7070 ASTM D 785
Hardness, Rockwell R118118 ASTM D 785
Tensile Strength, Ultimate65 MPa9430 psi 50 mm/min; ISO 527
Tensile Strength @ Break68.9 MPa10000 psi Type I, 2.0 in/min; ASTM D 638
Tensile Strength, Yield63 MPa9140 psi 50 mm/min; ISO 527
Tensile Strength @ Yield62.1 MPa9000 psi Type I, 2.0 in/min; ASTM D 638
Elongation at Break100 %100 % 50 mm/min; ISO 527
Elongation at Break125 %125 % Type I, 2.0 in/min; ASTM D 638
Elongation at Yield6 %6 % 50 mm/min; ISO 527
Elongation at Yield7 %7 % Type I, 2.0 in/min; ASTM D 638
Tensile Modulus2.35 GPa341 ksi 1 mm/min; ISO 527
Tensile Modulus2.38 GPa345 ksi 2.0 in/min; ASTM D 638
Flexural Modulus2.3 GPa334 ksi 2 mm/min; ISO 178
Flexural Modulus2.14 GPa310 ksi 0.05 in/min, 2" span; ASTM D 790
Flexural Yield Strength90 MPa13100 psi 2 mm/min; ISO 178
Flexural Yield Strength96.5 MPa14000 psi 0.05 in/min, 2" span; ASTM D 790
Fatigue Strength6.89 MPa1000 psi Fatigue Limit, 2.5 MM cycles; ASTM D 671
Izod Impact, Notched (ISO)12 kJ/m²5.71 ft-lb/in² 80*10*4 +23 C; ISO 180/ 1A
Izod Impact, Unnotched32 J/cm60 ft-lb/in 73F; ASTM D 4812
Izod Impact, Unnotched (ISO)NBNB 80*10*4 +23 C; ISO 180/ 1U
Izod Impact, Unnotched Low Temp (ISO)NBNB 80*10*4 -30 C; ISO 180/ 1U
Izod Impact, Notched, Low Temp (ISO)10 kJ/m²4.76 ft-lb/in² 80*10*4; -30 C; ISO 180/ 1A
Charpy Impact UnnotchedNBNB 23C, Edgew 80*10*4 sp=62; ISO 179/1eU
Charpy Impact, Unnotched Low TempNBNB at -30C, Edgew 80*10*4 sp=62; ISO 179/1eU
Charpy Impact, Notched3.5 J/cm²16.7 ft-lb/in² 23 C; ISO 179/2C
Gardner Impact @ 23°C62.1 J45.8 ft-lb Instrumented Impact Energy @ peak, 73F; ASTM D 3763
Tensile Impact Strength472 kJ/m²225 ft-lb/in² Type "S"; ASTM D 1822
Falling Dart Impact169 J125 ft-lb 73F; ASTM D 3029
Taber Abrasion, mg/1000 Cycles1010 CS-17, 1 kg; ASTM D 1044
Izod Impact, Notched6.94 J/cm13 ft-lb/in 73F; ASTM D 256

Electrical Properties
Volume ResistivityMin 1e+015 ohm-cmMin 1e+015 ohm-cm IEC 60093
Volume ResistivityMin 1e+017 ohm-cmMin 1e+017 ohm-cm ASTM D 257
Surface Resistivity per SquareMin 1e+015 ohmMin 1e+015 ohm IEC 60093
Dielectric Constant2.72.7 1 MHz; IEC 60250
Dielectric Constant2.72.7 50 Hz; IEC 60250
Dielectric Constant2.962.96 1 MHz; ASTM D 150
Dielectric Constant3.173.17 60 Hz; ASTM D 150
Dielectric Strength15 kV/mm380 V/mil in air, 125 mils; ASTM D 149
Dielectric Strength17 kV/mm432 kV/in in oil, 3.2 mm; IEC 60243-1
Dissipation Factor0.00090.0009 60 Hz; ASTM D 150
Dissipation Factor0.0010.001 50 Hz; IEC 60250
Dissipation Factor0.010.01 1 MHz; IEC 60250
Dissipation Factor0.010.01 1 MHz; ASTM D 150

Thermal Properties
CTE, linear 20°C70 µm/m-°C38.9 µin/in-°F Flow, 23C-80C; ISO 11359-2
CTE, linear 68°F68.4 µm/m-°C38 µin/in-°F Flow, -40F to 200F; ASTM E 831
Specific Heat Capacity1.26 J/g-°C0.3 BTU/lb-°F ASTM C 351
Thermal Conductivity0.19 W/m-K1.32 BTU-in/hr-ft²-°F ASTM C 177
Thermal Conductivity0.2 W/m-K1.39 BTU-in/hr-ft²-°F ISO 8302
Deflection Temperature at 0.46 MPa (66 psi)133 °C271 °F HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm; ISO 75/Be
Deflection Temperature at 0.46 MPa (66 psi)138 °C280 °F 0.250 inch, unannealed; ASTM D 648
Deflection Temperature at 1.8 MPa (264 psi)122 °C252 °F HDT/Ae, 1.82 MPa Edgew 120*10*4 sp=100mm; ISO 75/Ae
Deflection Temperature at 1.8 MPa (264 psi)129 °C265 °F 0.250 inch, unannealed; ASTM D 648
Vicat Softening Point140 °C284 °F B/50; ISO 306
Vicat Softening Point141 °C286 °F B/120; ISO 306
Oxygen Index25 %25 % ISO 4589

Optical Properties
Refractive Index1.5861.586 ASTM D 542
Haze1 %1 % 0.100 inch; ASTM D 1003
Transmission, Visible88 %88 % 0.100 inch; ASTM D 1003

Descriptive Properties
Ball Pressure Test, 125 C +/- 2 CPASSES IEC 60035-1
Printer friendly version Printer friendly version


Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistant format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into MatWeb.

ZYLAR acrylic copolymers - The Clear Alternative to Polycarbonate and ABS

<meta http-equiv=Content-Type content="text/html; charset=UTF-8">
请读关于材料数据的使用许可协议和我们的隐私权。询问或评论有关 MatWeb? 请与webmaster@matweb.com 联系。我们感谢您对 MatWeb的参与。

本站点由 Automation Creations, Inc. 设计和维护。这个网站的内容, MatWeb 的商标,与 "MatWeb" 由 Automation Creations, Inc.版权1996-2006拥有 。 MatWeb 意欲为个人使用 , 非商业用途。这个站点的内容、结果和技术数据,未经由 Automation Creations, Inc. 允许, 不可以被电子,摄影或实质上地再生产或自动化创作。