|
MatWeb, The Online Materials Database
SABIC Innovative Plastics LEXAN EXL1414 Amorphous Thermoplastic Polymer (North America)
Subcategory: Polycarbonate; Polymer; Thermoplastic
Close Analogs: Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics.
Material Notes: Information provided by GE Plastics for their North American product line. MatWeb has a separate entry for the European data sheet.
Physical Properties | Metric | English | Comments |
|
Density | 1.18 g/cc | 0.0426 lb/in³ | ASTM D 792 |
Linear Mold Shrinkage | 0.006 - 0.008 cm/cm | 0.006 - 0.008 in/in | Flow, 0.125 inch; ASTM D 955 |
Melt Flow | 10 g/10 min | 10 g/10 min | 300C/1.2 kgf (O); ASTM D 1238 |
Mechanical Properties |
|
Tensile Strength @ Break | 50.3 MPa | 7300 psi | Type I, 2.0 in/min; ASTM D 638 |
Tensile Strength @ Yield | 55.5 MPa | 8050 psi | Type I, 2.0 in/min; ASTM D 638 |
Elongation at Break | 98 % | 98 % | Type I, 2.0 in/min; ASTM D 638 |
Elongation at Yield | 6 % | 6 % | Type I, 2.0 in/min; ASTM D 638 |
Tensile Modulus | 2.02 GPa | 293 ksi | 2.0 in/min; ASTM D 638 |
Flexural Modulus | 2.23 GPa | 324 ksi | 0.05 in/min, 2" span; ASTM D 790 |
Flexural Yield Strength | 92.4 MPa | 13400 psi | 0.05 in/min, 2" span; ASTM D 790 |
Izod Impact, Notched, Low Temp | 7.74 J/cm | 14.5 ft-lb/in | at -22F; ASTM D 256 |
Gardner Impact @ 23°C | 70.1 J | 51.7 ft-lb | Instrumented Impact Total Energy, 73°F; ASTM D 3763 |
Izod Impact, Notched | 8.65 J/cm | 16.2 ft-lb/in | 73F; ASTM D 256 |
Electrical Properties |
|
Volume Resistivity | Min 1e+015 ohm-cm | Min 1e+015 ohm-cm | ASTM D 257 |
Surface Resistivity per Square | Min 1e+015 ohm | Min 1e+015 ohm | ASTM D 257 |
Dielectric Constant | 2.64 | 2.64 | 1 MHz; ASTM D 150 |
Dielectric Constant | 2.68 | 2.68 | 100 Hz; ASTM D 150 |
Dielectric Strength | 16.3 kV/mm | 414 V/mil | in oil, 32 mils; ASTM D 149 |
Dissipation Factor | 0.0012 | 0.0012 | 100 Hz; ASTM D 150 |
Dissipation Factor | 0.0093 | 0.0093 | 1 MHz; ASTM D 150 |
Thermal Properties |
|
CTE, linear 68°F | 69.7 µm/m-°C | 38.7 µin/in-°F | Flow, -40F to 100F; ASTM E 831 |
CTE, linear 68°F, Transverse to Flow | 74.7 µm/m-°C | 41.5 µin/in-°F | from -40F to 100F; ASTM E 831 |
Deflection Temperature at 0.46 MPa (66 psi) | 139 °C | 283 °F | 0.125 inch, unannealed; ASTM D 648 |
Deflection Temperature at 1.8 MPa (264 psi) | 124 °C | 256 °F | 0.125 inch, unannealed; ASTM D 648 |
Vicat Softening Point | 150 °C | 302 °F | Rate B; ASTM D 1525 |
UL RTI, Electrical | 50 °C | 122 °F | UL 746B |
UL RTI, Mechanical with Impact | 50 °C | 122 °F | UL 746B |
UL RTI, Mechanical without Impact | 50 °C | 122 °F | UL 746B |
Flammability, UL94 | HB | HB | 0.028 in. |
Descriptive Properties | |
UL File Number, USA | E121562 | |
|
|
|
Copyright 1996-2010 by Automation Creations, Inc. The information provided by
MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not
be reproduced either electronically, photographically or substantively without permission from
Automation Creations, Inc. No warranty, neither expressed nor implied, is given
regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of
information from MatWeb.
|
|