|
MatWeb, The Online Materials Database
SABIC Innovative Plastics LEXAN FL405 Polycarbonate (North America)
Subcategory: Polycarbonate; Polymer; Thermoplastic
Close Analogs: Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics.
Material Notes: Information provided by GE Plastics for their North American product line.
Physical Properties | Metric | English | Comments |
|
Density | 1.08 g/cc | 0.039 lb/in³ | Molded Foam; ASTM D 792 |
Density | 1.2 g/cc | 0.0434 lb/in³ | ASTM D 792 |
Water Absorption | 0.14 % | 0.14 % | 24 hours @ 73F; ASTM D 570 |
Water Absorption at Saturation | 0.31 % | 0.31 % | Equilibrium, 73F; ASTM D 570 |
Linear Mold Shrinkage | 0.006 - 0.008 cm/cm | 0.006 - 0.008 in/in | Flow, 0.250 inch; ASTM D 955 |
Mechanical Properties |
|
Tensile Strength @ Yield | 54.5 MPa | 7900 psi | 0.250"; ASTM D 638 |
Elongation at Break | 7.2 % | 7.2 % | 0.250"; ASTM D 638 |
Tensile Modulus | 2.1 GPa | 305 ksi | 0.250"; ASTM D 638 |
Flexural Modulus | 2.48 GPa | 360 ksi | 0.250"; ASTM D 790 |
Flexural Yield Strength | 86.2 MPa | 12500 psi | 0.250"; ASTM D 790 |
Izod Impact, Unnotched | 26.7 J/cm | 50 ft-lb/in | 73F; ASTM D 4812 |
Falling Dart Impact | 61 J | 45 ft-lb | 73F; GE Test |
Electrical Properties |
|
Volume Resistivity | 3.5e+017 ohm-cm | 3.5e+017 ohm-cm | ASTM D 257 |
Surface Resistivity per Square | Min 1.1e+017 ohm | Min 1.1e+017 ohm | ASTM D 257 |
Dielectric Constant | 2.42 | 2.42 | 100 Hz; ASTM D 150 |
Dielectric Constant | 2.43 | 2.43 | 1 MHz; ASTM D 150 |
Dielectric Strength | 12 kV/mm | 304 V/mil | in air, 250 mils; ASTM D 149 |
Dissipation Factor | 0.0011 | 0.0011 | 100 Hz; ASTM D 150 |
Dissipation Factor | 0.0044 | 0.0044 | 1 MHz; ASTM D 150 |
Thermal Properties |
|
CTE, linear 68°F | 66.6 µm/m-°C | 37 µin/in-°F | Flow, -40F to 200F; ASTM E 831 |
Specific Heat Capacity | 1.34 J/g-°C | 0.32 BTU/lb-°F | ASTM C 351 |
Deflection Temperature at 0.46 MPa (66 psi) | 138 °C | 280 °F | 0.250 inch, unannealed; ASTM D 648 |
Deflection Temperature at 1.8 MPa (264 psi) | 127 °C | 260 °F | 0.250 inch, unannealed; ASTM D 648 |
UL RTI, Electrical | 80 °C | 176 °F | UL 746B |
UL RTI, Mechanical with Impact | 80 °C | 176 °F | UL 746B |
UL RTI, Mechanical without Impact | 80 °C | 176 °F | UL 746B |
Flammability, UL94 | V-0 | V-0 | 0.12 in. |
Flammability, UL94 | 7 | 7 | 0.24 in. |
Flammability Test | 1.06 | 1.06 | FOAM - Flame Class Minimum Density; g/cm3 |
Oxygen Index | 39 % | 39 % | ASTM D 2863 |
Descriptive Properties | |
Foam Weight Reduction | 10% | Mechanical Properties Reported Herein (0.250") |
Foam Weight Reduction | 10% | Impact Properties Reported Herein (0.250") |
Foam Weight Reduction | 10% | Thermal Properties Reported Herein (0.250") |
Foam Weight Reduction | 10% | Physical Properties Reported Herein (0.250") |
Foam Weight Reduction | 20% | Electrical Properties Reported Herein (0.250") |
Radiant Panel Listing | UL tested | |
UL File Number, USA | E121562 | |
|
|
|
Copyright 1996-2010 by Automation Creations, Inc. The information provided by
MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not
be reproduced either electronically, photographically or substantively without permission from
Automation Creations, Inc. No warranty, neither expressed nor implied, is given
regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of
information from MatWeb.
|
|