|
MatWeb, The Online Materials Database
SABIC Innovative Plastics LEXAN IP300 Polycarbonate (North America)
Subcategory: Polycarbonate; Polymer; Thermoplastic
Close Analogs: Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics.
Material Notes: Information provided by GE Plastics for their North American product line.
Physical Properties | Metric | English | Comments |
|
Density | 1.18 g/cc | 0.0426 lb/in³ | ASTM D 792 |
Linear Mold Shrinkage | 0.005 - 0.007 cm/cm | 0.005 - 0.007 in/in | Flow, 0.125 inch; ASTM D 955 |
Melt Flow | 18 g/10 min | 18 g/10 min | 300C/1.2 kgf (O); ASTM D 1238 |
Mechanical Properties |
|
Hardness, Rockwell R | 65 | 65 | ASTM D 785 |
Tensile Strength @ Break | 55.2 MPa | 8000 psi | Type I, 2.0 in/min; ASTM D 638 |
Tensile Strength @ Yield | 57.9 MPa | 8400 psi | Type I, 2.0 in/min; ASTM D 638 |
Elongation at Break | 75 % | 75 % | Type I, 2.0 in/min; ASTM D 638 |
Flexural Modulus | 2.14 GPa | 310 ksi | 0.05 in/min, 2" span; ASTM D 790 |
Flexural Yield Strength | 84.8 MPa | 12300 psi | 0.05 in/min, 2" span; ASTM D 790 |
Izod Impact, Notched, Low Temp | 5.02 J/cm | 9.4 ft-lb/in | at -22F; ASTM D 256 |
Gardner Impact @ 23°C | 50.2 J | 37 ft-lb | Instrumented Impact Energy @ peak, 73F; ASTM D 3763 |
Gardner Impact @ 23°C | 50.2 J | 37 ft-lb | Instrumented Impact Energy @ peak, -22°F; ASTM D 3763 |
Izod Impact, Notched | 5.87 J/cm | 11 ft-lb/in | 73F; ASTM D 256 |
Thermal Properties |
|
Deflection Temperature at 1.8 MPa (264 psi) | 121 °C | 250 °F | 0.125 inch, unannealed; ASTM D 648 |
|
|
|
Copyright 1996-2010 by Automation Creations, Inc. The information provided by
MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not
be reproduced either electronically, photographically or substantively without permission from
Automation Creations, Inc. No warranty, neither expressed nor implied, is given
regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of
information from MatWeb.
|
|