|
MatWeb, The Online Materials Database
SABIC Innovative Plastics LEXAN LGK5030 Polycarbonate (North America)
Subcategory: Polycarbonate; Polymer; Thermoplastic
Close Analogs: Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics.
Material Notes: Information provided by GE Plastics for their North American product line. MatWeb has a separate entry for the European data sheet.
Physical Properties | Original Value | Comments |
|
Density | 1.61 g/cc | ASTM D 792 |
Water Absorption | 0.14 % | 24 hours @ 73F; ASTM D 570 |
Linear Mold Shrinkage | 0.0005 - 0.0025 cm/cm | Flow, 0.125 inch; ASTM D 955 |
Linear Mold Shrinkage, Transverse | 0.001 - 0.003 cm/cm | 0.125 inch; ASTM D 955 |
Mechanical Properties |
|
Tensile Strength @ Break | 20650 psi | Type I, 2.0 in/min; ASTM D 638 |
Elongation at Break | 4 % | Type I, 2.0 in/min; ASTM D 638 |
Flexural Modulus | 1.552e+006 psi | 0.05 in/min, 2" span; ASTM D 790 |
Flexural Strength | 27050 psi | 0.05 in/min, 2" span; ASTM D 790 |
Izod Impact, Notched | 2.3 ft-lb/in | 73F; ASTM D 256 |
Electrical Properties |
|
Dielectric Strength | 415 V/mil | in oil, 125 mils; ASTM D 149 |
Thermal Properties |
|
CTE, linear 68°F | 12 µin/in-°F | Flow, -22F to 86F; ASTM D 696 |
CTE, linear 68°F, Transverse to Flow | 22 µin/in-°F | From -22F to 86F; ASTM D 696 |
Deflection Temperature at 1.8 MPa (264 psi) | 291 °F | 0.250 inch, unannealed; ASTM D 648 |
Flammability, UL94 | V-1 | 0.058 in. |
Flammability, UL94 | V-0 | 0.11 in. |
Flammability, UL94 | 7 | 0.142 in. |
Descriptive Properties | |
UL File Number, JAPAN | E45587 | |
|
|
|
Copyright 1996-2010 by Automation Creations, Inc. The information provided by
MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not
be reproduced either electronically, photographically or substantively without permission from
Automation Creations, Inc. No warranty, neither expressed nor implied, is given
regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of
information from MatWeb.
|
|