|
MatWeb, The Online Materials Database
SABIC Innovative Plastics LEXAN 3413R Polycarbonate (North America)
Subcategory: Polycarbonate; Polymer; Thermoplastic
Close Analogs: Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics.
Material Notes: Information provided by GE Plastics for their North American product line. MatWeb has a separate entry for the European data sheet.
Physical Properties | Metric | English | Comments |
|
Density | 1.43 g/cc | 0.0517 lb/in³ | ASTM D 792 |
Water Absorption | 0.14 % | 0.14 % | 24 hours @ 73F; ASTM D 570 |
Water Absorption at Saturation | 0.26 % | 0.26 % | Equilibrium, 73F; ASTM D 570 |
Linear Mold Shrinkage | 0.001 - 0.003 cm/cm | 0.001 - 0.003 in/in | Flow, 0.125 inch; ASTM D 955 |
Melt Flow | 19 g/10 min | 19 g/10 min | 300C/5.0 kgf; ASTM D 1238 |
Mechanical Properties |
|
Hardness, Rockwell M | 92 | 92 | ASTM D 785 |
Hardness, Rockwell R | 120 | 120 | ASTM D 785 |
Tensile Strength @ Break | 100 MPa | 14500 psi | Type I, 0.2 in/min; ASTM D 638 |
Elongation at Break | 2 % | 2 % | Type I, 0.2 in/min; ASTM D 638 |
Flexural Modulus | 6.62 GPa | 960 ksi | 0.05 in/min, 2" span; ASTM D 790 |
Flexural Yield Strength | 153 MPa | 22200 psi | 0.05 in/min, 2" span; ASTM D 790 |
Fatigue Strength | 41.4 MPa | 6000 psi | Fatigue Limit, 2.5 MM cycles; ASTM D 671 |
Izod Impact, Unnotched | 11.2 J/cm | 21 ft-lb/in | 73F; ASTM D 4812 |
Tensile Impact Strength | 67.2 kJ/m² | 32 ft-lb/in² | Type "S"; ASTM D 1822 |
Falling Dart Impact | 5.42 J | 4 ft-lb | 73F; ASTM D 3029 |
Taber Abrasion, mg/1000 Cycles | 24 | 24 | CS-17, 1 kg; ASTM D 1044 |
Izod Impact, Notched | 1.07 J/cm | 2 ft-lb/in | 73F; ASTM D 256 |
Electrical Properties |
|
Volume Resistivity | Min 1e+017 ohm-cm | Min 1e+017 ohm-cm | ASTM D 257 |
Dielectric Constant | 3.31 | 3.31 | 1 MHz; ASTM D 150 |
Dielectric Constant | 3.35 | 3.35 | 60 Hz; ASTM D 150 |
Dielectric Strength | 18.7 kV/mm | 475 V/mil | in air, 125 mils; ASTM D 149 |
Dissipation Factor | 0.0011 | 0.0011 | 60 Hz; ASTM D 150 |
Dissipation Factor | 0.007 | 0.007 | 1 MHz; ASTM D 150 |
Arc Resistance | Max 60 sec | Max 60 sec | Tungsten (+/- 0.125 inch); PLC Code 7; ASTM D 495 |
Comparative Tracking Index | Max 100 V | Max 100 V | (+/- 0.125 inch); PLC Code 5; UL 746A |
Hot Wire Ignition, HWI | Min 120 sec | Min 120 sec | (+/- 0.125 inch); PLC Code 0; UL 746A |
High Amp Arc Ignition, HAI | Max 15 arcs | Max 15 arcs | Surface (+/- 0.125 inch); PLC Code 4; UL 746A |
High Voltage Arc-Tracking Rate, HVTR | 80 - 150 mm/min | 3.15 - 5.91 in/min | (+/- 0.125 inch); PLC Code 3; UL 746A |
Thermal Properties |
|
CTE, linear 68°F | 21.6 µm/m-°C | 12 µin/in-°F | Flow, -40F to 200F; ASTM E 831 |
Specific Heat Capacity | 1.13 J/g-°C | 0.27 BTU/lb-°F | ASTM C 351 |
Thermal Conductivity | 0.22 W/m-K | 1.53 BTU-in/hr-ft²-°F | ASTM C 177 |
Deflection Temperature at 0.46 MPa (66 psi) | 152 °C | 305 °F | 0.250 inch, unannealed; ASTM D 648 |
Deflection Temperature at 1.8 MPa (264 psi) | 146 °C | 295 °F | 0.250 inch, unannealed; ASTM D 648 |
Vicat Softening Point | 166 °C | 330 °F | Rate B; ASTM D 1525 |
UL RTI, Electrical | 120 °C | 248 °F | UL 746B |
UL RTI, Mechanical with Impact | 120 °C | 248 °F | UL 746B |
UL RTI, Mechanical without Impact | 130 °C | 266 °F | UL 746B |
Flammability, UL94 | V-1 | V-1 | 0.058 in. |
Flammability, UL94 | V-0 | V-0 | 0.118 in. |
Descriptive Properties | |
UL File Number, USA | E121562 | |
|
|
|
Copyright 1996-2010 by Automation Creations, Inc. The information provided by
MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not
be reproduced either electronically, photographically or substantively without permission from
Automation Creations, Inc. No warranty, neither expressed nor implied, is given
regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of
information from MatWeb.
|
|