|
MatWeb, The Online Materials Database
SABIC Innovative Plastics LEXAN 3433R Polycarbonate (North America)
Subcategory: Polycarbonate; Polymer; Thermoplastic
Close Analogs: Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics.
Material Notes: Information provided by GE Plastics for their North American product line.
Physical Properties | Original Value | Comments |
|
Density | 1.43 g/cc | ASTM D 792 |
Water Absorption | 0.14 % | 24 hours @ 73F; ASTM D 570 |
Water Absorption at Saturation | 0.26 % | Equilibrium, 73F; ASTM D 570 |
Linear Mold Shrinkage | 0.001 - 0.003 cm/cm | Flow, 0.125 inch; ASTM D 955 |
Melt Flow | 19 g/10 min | 300C/5.0 kgf; ASTM D 1238 |
Mechanical Properties |
|
Hardness, Rockwell M | 92 | ASTM D 785 |
Hardness, Rockwell R | 121 | ASTM D 785 |
Tensile Strength @ Break | 19000 psi | Type I, 0.2 in/min; ASTM D 638 |
Elongation at Break | 3 % | Type I, 0.2 in/min; ASTM D 638 |
Flexural Modulus | 1.1e+006 psi | 0.05 in/min, 2" span; ASTM D 790 |
Flexural Yield Strength | 23000 psi | 0.05 in/min, 2" span; ASTM D 790 |
Fatigue Strength | 6000 psi | Fatigue Limit, 2.5 MM cycles; ASTM D 671 |
Izod Impact, Unnotched | 21 ft-lb/in | 73F; ASTM D 4812 |
Tensile Impact Strength | 32 ft-lb/in² | Type "S"; ASTM D 1822 |
Falling Dart Impact | 4 ft-lb | 73F; ASTM D 3029 |
Taber Abrasion, mg/1000 Cycles | 24 | CS-17, 1 kg; ASTM D 1044 |
Izod Impact, Notched | 2 ft-lb/in | 73F; ASTM D 256 |
Thermal Properties |
|
CTE, linear 68°F | 12 µin/in-°F | Flow, -40F to 200F; ASTM E 831 |
Specific Heat Capacity | 0.27 BTU/lb-°F | ASTM C 351 |
Thermal Conductivity | 0.22 W/m-K | ASTM C 177 |
Deflection Temperature at 0.46 MPa (66 psi) | 305 °F | 0.250 inch, unannealed; ASTM D 648 |
Deflection Temperature at 1.8 MPa (264 psi) | 295 °F | 0.250 inch, unannealed; ASTM D 648 |
Vicat Softening Point | 310 °F | Rate B; ASTM D 1525 |
|
|
|
Copyright 1996-2010 by Automation Creations, Inc. The information provided by
MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not
be reproduced either electronically, photographically or substantively without permission from
Automation Creations, Inc. No warranty, neither expressed nor implied, is given
regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of
information from MatWeb.
|
|