|
MatWeb, The Online Materials Database
SABIC Innovative Plastics LEXAN ML3955 Polycarbonate (Europe)
Subcategory: Polycarbonate; Polymer; Thermoplastic
Close Analogs: Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics.
Material Notes: Information provided by GE Plastics for their European product line.
Physical Properties | Metric | English | Comments |
|
Density | 1.2 g/cc | 0.0434 lb/in³ | ASTM D 792 |
Density | 1.2 g/cc | 0.0434 lb/in³ | ISO 1183 |
Water Absorption | 0.35 % | 0.35 % | 24 hours; ASTM D 570 |
Water Absorption at Saturation | 0.35 % | 0.35 % | 23C; ISO 62 |
Linear Mold Shrinkage | 0.005 - 0.007 cm/cm | 0.005 - 0.007 in/in | Flow; ASTM D 955 |
Melt Flow | 17 g/10 min | 17 g/10 min | cm3/10min; Melt Volume Rate, MVR at 300C/2.16 kg; ISO 1133 |
Mechanical Properties |
|
Hardness, Rockwell R | 70 | 70 | ISO 2039/2 |
Hardness, H358/30 | 95 MPa | 13800 psi | ISO 2039/1 |
Tensile Strength, Ultimate | 65 MPa | 9430 psi | 50 mm/min; ISO 527 |
Tensile Strength, Yield | 60 MPa | 8700 psi | 50 mm/min; ISO 527 |
Elongation at Break | 120 % | 120 % | 50 mm/min; ISO 527 |
Elongation at Yield | 7 % | 7 % | 50 mm/min; ISO 527 |
Tensile Modulus | 2.3 GPa | 334 ksi | 1 mm/min; ISO 527 |
Flexural Modulus | 2.3 GPa | 334 ksi | 2 mm/min; ISO 178 |
Flexural Yield Strength | 100 MPa | 14500 psi | 2 mm/min; ISO 178 |
Izod Impact, Notched | 7 J/cm | 13.1 ft-lb/in | 23 C; ASTM D 256 |
Izod Impact, Notched (ISO) | 50 kJ/m² | 23.8 ft-lb/in² | 80*10*4 +23 C; ISO 180/ 1A |
Izod Impact, Notched, Low Temp | 1.25 J/cm | 2.34 ft-lb/in | at -40 C; ASTM D 256 |
Izod Impact, Notched, Low Temp (ISO) | 10 kJ/m² | 4.76 ft-lb/in² | 80*10*4 -30 C; ISO 180/ 1A |
Taber Abrasion, mg/1000 Cycles | 10 | 10 | CS-17, 1 kg; GE Test |
Thermal Properties |
|
CTE, linear 20°C | 70 µm/m-°C | 38.9 µin/in-°F | 23C-80C, flow; ISO 11359-2 |
Thermal Conductivity | 0.2 W/m-K | 1.39 BTU-in/hr-ft²-°F | ISO 8302 |
Deflection Temperature at 0.46 MPa (66 psi) | 136 °C | 277 °F | HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm; ISO 75/Be |
Deflection Temperature at 0.46 MPa (66 psi) | 143 °C | 289 °F | ASTM D 648 |
Deflection Temperature at 1.8 MPa (264 psi) | 124 °C | 255 °F | HDT/Ae, 1.82 MPa Edgew 120*10*4 sp=100mm; ISO 75/Ae |
Deflection Temperature at 1.8 MPa (264 psi) | 138 °C | 280 °F | ASTM D 648 |
Vicat Softening Point | 143 °C | 289 °F | B/120; ISO 306 |
Vicat Softening Point | 146 °C | 295 °F | B/50; ISO 306 |
Vicat Softening Point | 148 °C | 298 °F | A/50; ISO 306 |
Optical Properties |
|
Haze | Max 0.8 % | Max 0.8 % | ASTM D 1003 |
Transmission, Visible | 88 - 90 % | 88 - 90 % | ASTM D 1003 |
Descriptive Properties | |
Ball Pressure Test, 125 C +/- 2 C | PASSES | IEC 60035-1 |
Ball Pressure Test, 75 C +/- 2 C | PASSES | IEC 60035-1 |
|
|
|
Copyright 1996-2010 by Automation Creations, Inc. The information provided by
MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not
be reproduced either electronically, photographically or substantively without permission from
Automation Creations, Inc. No warranty, neither expressed nor implied, is given
regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of
information from MatWeb.
|
|