|
MatWeb, The Online Materials Database
SABIC Innovative Plastics LEXAN ML3999 Polycarbonate (Europe)
Subcategory: Polycarbonate; Polymer; Thermoplastic
Close Analogs: Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics.
Material Notes: Information provided by GE Plastics for their European product line.
Physical Properties | Metric | English | Comments |
|
Density | 1.35 g/cc | 0.0488 lb/in³ | ISO 1183 |
Melt Flow | 10 g/10 min | 10 g/10 min | cm3/10min; Melt Volume Rate, MVR at 300C/1.2 kg; ISO 1133 |
Mechanical Properties |
|
Hardness, H358/30 | 135 MPa | 19600 psi | ISO 2039/1 |
Tensile Strength, Ultimate | 80 MPa | 11600 psi | 50 mm/min; ISO 527 |
Elongation at Break | 2 % | 2 % | 50 mm/min; ISO 527 |
Tensile Modulus | 5.8 GPa | 841 ksi | 1 mm/min; ISO 527 |
Flexural Modulus | 5.6 GPa | 812 ksi | 2 mm/min; ISO 178 |
Flexural Strength | 125 MPa | 18100 psi | 2 mm/min; ISO 178 |
Izod Impact, Notched (ISO) | 7 kJ/m² | 3.33 ft-lb/in² | 80*10*4 +23 C; ISO 180/ 1A |
Izod Impact, Unnotched (ISO) | 27 kJ/m² | 12.8 ft-lb/in² | 80*10*4 +23 C; ISO 180/ 1U |
Izod Impact, Unnotched Low Temp (ISO) | 30 kJ/m² | 14.3 ft-lb/in² | 80*10*4 -30 C; ISO 180/ 1U |
Izod Impact, Notched, Low Temp (ISO) | 6 kJ/m² | 2.86 ft-lb/in² | 80*10*4 -30 C; ISO 180/ 1A |
Electrical Properties |
|
Volume Resistivity | Min 1e+014 ohm-cm | Min 1e+014 ohm-cm | IEC 60093 |
Surface Resistivity per Square | Min 1e+015 ohm | Min 1e+015 ohm | ROA; IEC 60093 |
Dielectric Constant | 2.9 | 2.9 | 50 Hz; IEC 60250 |
Dielectric Constant | 2.9 | 2.9 | 1 MHz; IEC 60250 |
Dielectric Strength | 18 kV/mm | 457 kV/in | in oil, 3.2 mm; IEC 60243-1 |
Dissipation Factor | 0.0002 | 0.0002 | 50 Hz; IEC 60250 |
Dissipation Factor | 0.008 | 0.008 | 1 MHz; IEC 60250 |
Thermal Properties |
|
CTE, linear 20°C | 30 µm/m-°C | 16.7 µin/in-°F | 23C-80C, flow; ISO 11359-2 |
CTE, linear 20°C Transverse to Flow | 70 µm/m-°C | 38.9 µin/in-°F | 23C-80C; ISO 11359-2 |
Deflection Temperature at 0.46 MPa (66 psi) | 135 °C | 275 °F | HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm; ISO 75/Be |
Deflection Temperature at 1.8 MPa (264 psi) | 132 °C | 270 °F | HDT/Ae, 1.82 MPa Edgew 120*10*4 sp=100mm; ISO 75/Ae |
Vicat Softening Point | 140 °C | 284 °F | B/50; ISO 306 |
Vicat Softening Point | 142 °C | 288 °F | B/120; ISO 306 |
Flammability, UL94 | V-0 | V-0 | 1.5 mm |
Glow Wire Test | 960 °C | 1760 °F | Passes at 3.2 mm; IEC 60695-2-1 |
|
|
|
Copyright 1996-2010 by Automation Creations, Inc. The information provided by
MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not
be reproduced either electronically, photographically or substantively without permission from
Automation Creations, Inc. No warranty, neither expressed nor implied, is given
regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of
information from MatWeb.
|
|