|
MatWeb, The Online Materials Database
SABIC Innovative Plastics LEXAN OQ1030 Polycarbonate (Europe)
Subcategory: Polycarbonate; Polymer; Thermoplastic
Close Analogs: Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics.
Material Notes: Information provided by GE Plastics for their European product line. This product is no longer produced or sold by GE Plastics
Physical Properties | Metric | English | Comments |
|
Density | 1.19 g/cc | 0.043 lb/in³ | ISO 1183 |
Linear Mold Shrinkage | 0.005 - 0.007 cm/cm | 0.005 - 0.007 in/in | Flow; ASTM D 955 |
Melt Flow | 13 g/10 min | 13 g/10 min | cm3/10min; Melt Volume Rate, MVR at 250C/1.2 kg; ISO 1133 |
Mechanical Properties |
|
Hardness, H358/30 | 100 MPa | 14500 psi | ISO 2039/1 |
Tensile Strength, Ultimate | 45 MPa | 6530 psi | 50 mm/min; ISO 527 |
Tensile Strength, Yield | 60 MPa | 8700 psi | 50 mm/min; ISO 527 |
Elongation at Break | Min 50 % | Min 50 % | 50 mm/min; ISO 527 |
Elongation at Yield | 5 % | 5 % | 50 mm/min; ISO 527 |
Tensile Modulus | 2.3 GPa | 334 ksi | 1 mm/min; ISO 527 |
Flexural Modulus | 2.4 GPa | 348 ksi | 2 mm/min; ISO 178 |
Flexural Yield Strength | 90 MPa | 13100 psi | 2 mm/min; ISO 178 |
Izod Impact, Notched (ISO) | 12 kJ/m² | 5.71 ft-lb/in² | 80*10*4 +23 C; ISO 180/ 1A |
Izod Impact, Unnotched (ISO) | NB | NB | 80*10*4 +23 C; ISO 180/ 1U |
Izod Impact, Unnotched Low Temp (ISO) | NB | NB | 80*10*4 -30 C; ISO 180/ 1U |
Charpy Impact Unnotched | NB | NB | 23C, Unnotch Edgew 80*10*4 sp=62; ISO 179/1eU |
Charpy Impact, Unnotched Low Temp | NB | NB | at -30C, Unnotch Edgew 80*10*4 sp=62; ISO 179/1eU |
Charpy Impact, Notched | 1.4 J/cm² | 6.66 ft-lb/in² | 23C, V-notch Edgew 80*10*4 sp=62; ISO 179/1eA |
Taber Abrasion, mg/1000 Cycles | 35 | 35 | CS-17, 1 kg; GE Test |
Thermal Properties |
|
CTE, linear 20°C | 70 µm/m-°C | 38.9 µin/in-°F | 23C-80C, flow; ISO 11359-2 |
CTE, linear 20°C Transverse to Flow | 70 µm/m-°C | 38.9 µin/in-°F | 23C-80C; ISO 11359-2 |
Deflection Temperature at 0.46 MPa (66 psi) | 135 °C | 275 °F | HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm; ISO 75/Be |
Deflection Temperature at 1.8 MPa (264 psi) | 122 °C | 252 °F | HDT/Ae, 1.82 MPa Edgew 120*10*4 sp=100mm; ISO 75/Ae |
Vicat Softening Point | 140 °C | 284 °F | B/50; ISO 306 |
Vicat Softening Point | 142 °C | 288 °F | B/120; ISO 306 |
|
|
|
Copyright 1996-2010 by Automation Creations, Inc. The information provided by
MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not
be reproduced either electronically, photographically or substantively without permission from
Automation Creations, Inc. No warranty, neither expressed nor implied, is given
regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of
information from MatWeb.
|
|