|
MatWeb, The Online Materials Database
SABIC Innovative Plastics LEXAN® FL400 Polycarbonate, Unfilled, Foam Grade
Subcategory: Polycarbonate; Polymer; Thermoplastic
Close Analogs: Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics.
Material Notes: Data for 3.2 mm (1/8 in) samples unless otherwise noted. Data provided by GE Plastics.
Physical Properties | Metric | English | Comments |
|
Density | 1.2 g/cc | 0.0434 lb/in³ | ASTM D792 |
Water Absorption | 0.14 % | 0.14 % | 24 hrs; 20°C; ASTM D570 |
Linear Mold Shrinkage | 0.006 - 0.008 cm/cm | 0.006 - 0.008 in/in | 6.4 mm sample |
Mechanical Properties |
|
Tensile Strength, Ultimate | 54 MPa | 7830 psi | ASTM D638 |
Elongation at Break | 7 % | 7 % | ASTM D638 |
Modulus of Elasticity | 2.1 GPa | 305 ksi | ASTM D638 |
Flexural Modulus | 2.5 GPa | 363 ksi | 6.4 mm sample; ASTM D790 |
Flexural Yield Strength | 86 MPa | 12500 psi | ASTM D790 |
Electrical Properties |
|
Electrical Resistivity | 4e+017 ohm-cm | 4e+017 ohm-cm | ASTM D257 |
Surface Resistance | 1e+017 ohm | 1e+017 ohm | |
Dielectric Constant | 2.43 | 2.43 | 1 MHz; ASTM D150 |
Dissipation Factor | 0.0044 | 0.0044 | 1 MHz; ASTM D150 |
Thermal Properties |
|
CTE, linear 20°C | 67 µm/m-°C | 37.2 µin/in-°F | ASTM E831 |
Deflection Temperature at 0.46 MPa (66 psi) | 137 °C | 279 °F | 6.4 mm sample; ASTM D648 |
Deflection Temperature at 1.8 MPa (264 psi) | 126 °C | 259 °F | 6.4 mm (0.25 in.) sample; ASTM D648 |
UL RTI, Electrical | 80 °C | 176 °F | UL 746B |
UL RTI, Mechanical with Impact | 80 °C | 176 °F | UL 746B |
UL RTI, Mechanical without Impact | 80 °C | 176 °F | UL 746B |
Flammability, UL94 | V-0 | V-0 | 3.2 mm |
Flammability, UL94 | V-0 | V-0 | 5V at 3.2 mm. |
|
|
|
Copyright 1996-2010 by Automation Creations, Inc. The information provided by
MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not
be reproduced either electronically, photographically or substantively without permission from
Automation Creations, Inc. No warranty, neither expressed nor implied, is given
regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of
information from MatWeb.
|
|