|
MatWeb, The Online Materials Database
LNP (SABIC Innovative Plastics) LEXAN® EXCP0101 Polycarbonate, 10% Carbon Fiber Reinforced
Subcategory: Filled/Reinforced Thermoplastic; Polycarbonate; Polymer; Thermoplastic
Close Analogs: Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics.
Material Notes: Business and computer equipment. - Features: Flame Retardant
- Forms: Pellets
- Processing Method: Injection Molding
Information provided by LNP, a GE Plastics Company.
Physical Properties | Metric | English | Comments |
|
Specific Gravity | 1.25 g/cc | 0.0452 lb/in³ | ASTM D792 |
Linear Mold Shrinkage | 0.002 - 0.005 cm/cm | 0.002 - 0.005 in/in | 3.18 mm; ASTM D955 |
Linear Mold Shrinkage, Transverse | 0.004 - 0.006 cm/cm | 0.004 - 0.006 in/in | 3.18 mm; ASTM D955 |
Mechanical Properties |
|
Tensile Strength at Break | 100 MPa | 14500 psi | Type I, 5mm/min; ASTM D638 |
Tensile Strength, Yield | 100 MPa | 14500 psi | Type I, 5mm/min; ASTM D638 |
Elongation at Break | 3 % | 3 % | Type I, 5mm/min; ASTM D638 |
Elongation at Yield | 3 % | 3 % | Type I, 5mm/min; ASTM D638 |
Tensile Modulus | 6.48 GPa | 940 ksi | 5 mm/min; ASTM D638 |
Flexural Modulus | 6.45 GPa | 936 ksi | (50.8 mm Span) 1mm/min; ASTM D790 |
Flexural Strength | 170 MPa | 24700 psi | at Break, (50.8 mm Span) 1mm/min; ASTM D790 |
Izod Impact, Notched | 0.534 J/cm | 1 ft-lb/in | ASTM D256 |
Izod Impact, Unnotched | 5.6 J/cm | 10.5 ft-lb/in | ASTM D256 |
Falling Dart Impact | 8.47 J | 6.25 ft-lb | ASTM D3763 |
Electrical Properties |
|
Volume Resistivity | 4000 ohm-cm | 4000 ohm-cm | IEC 60093 |
Surface Resistance | 100000 ohm | 100000 ohm | IEC 60093 |
Thermal Properties |
|
Deflection Temperature at 0.46 MPa (66 psi) | 142 °C | 288 °F | Unannealed (3.18 mm); ASTM D648 |
Deflection Temperature at 1.8 MPa (264 psi) | 138 °C | 280 °F | Unannealed (3.18 mm); ASTM D648 |
Processing Properties |
|
Rear Barrel Temperature | 266 - 288 °C | 511 - 550 °F | |
Middle Barrel Temperature | 277 - 299 °C | 531 - 570 °F | |
Front Barrel Temperature | 288 - 310 °C | 550 - 590 °F | |
Nozzle Temperature | 282 - 304 °C | 540 - 579 °F | |
Melt Temperature | 288 - 310 °C | 550 - 590 °F | |
Mold Temperature | 71.1 - 93.3 °C | 160 - 200 °F | |
Drying Temperature | 121 °C | 250 °F | |
Dry Time | 3 - 8 hour | 3 - 8 hour | |
Moisture Content | 0.02 % | 0.02 % | Suggested |
Back Pressure | 0.345 - 0.689 MPa | 50 - 99.9 psi | |
Clamp Pressure | 41 - 69 MPa | 5950 - 10000 psi | |
Shot Size | 40 - 60 % | 40 - 60 % | Suggested |
Vent Depth | 0.0025 - 0.0076 cm | 0.000984 - 0.00299 in | |
Screw Speed | 40 - 70 rpm | 40 - 70 rpm | |
|
|
|
Copyright 1996-2010 by Automation Creations, Inc. The information provided by
MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not
be reproduced either electronically, photographically or substantively without permission from
Automation Creations, Inc. No warranty, neither expressed nor implied, is given
regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of
information from MatWeb.
|
|