MatWeb, The Online Materials Database

Aluminum 1199-O


Subcategory: 1000 Series Aluminum; Aluminum Alloy; Metal; Nonferrous Metal

Close Analogs:

Composition Notes:
The aluminum content for unalloyed aluminum made by a refining process is the difference between 100.00 percent and the sum of all other metallic elements present in amounts of 0.0010 percent of more each, expressed to the third decimal before determining the sum, which is rounded to the second decimal before subtracting. When an element's specified maximum limit is 0.0XX, an observed value or a calculated value greater than 0.0005 but less than 0.0010% is rounded off and shown as " less than 0.001 ".
Composition information provided by the Aluminum Association and is not for design.

Key Words: Aluminium 1199-O; Refined Aluminum; Refined Aluminium; Raffinal; Super-purity Aluminum; UNS A91199, AA11990-O

Component   Wt. %
AlMin 99.99 
CuMax 0.006 
FeMax 0.006 
GaMax 0.005 
Component   Wt. %
MgMax 0.006 
MnMax 0.002 
Other, eachMax 0.002 
SiMax 0.006 
Component   Wt. %
TiMax 0.002 
VMax 0.005 
ZnMax 0.006 

Material Notes:
Data points with the AA note have been provided by the Aluminum Association, Inc. and are NOT FOR DESIGN.

Physical PropertiesOriginal ValueComments
Density2.7 g/cc AA; Typical

Mechanical Properties
Hardness, Brinell12 500 kg load with 10 mm ball. Calculated value.
Tensile Strength, Ultimate45 MPa 
Tensile Strength, Yield10 MPa 
Elongation at Break50 % In 5 cm; Sample 1.6 mm thick
Modulus of Elasticity62 GPa In Tension; Compressive Modulus is about 2% higher
Poisson's Ratio0.33 
Shear Modulus25 GPa 
Shear Strength34 MPa Calculated value.

Electrical Properties
Electrical Resistivity2.7e-006 ohm-cm 

Thermal Properties
Heat of Fusion390 J/g 
CTE, linear 20°C23.6 µm/m-°C 20-100ºC
CTE, linear 250°C25.5 µm/m-°C Average over the range 20-300ºC
Specific Heat Capacity0.9 J/g-°C 
Thermal Conductivity243 W/m-K 
Melting Point660 - 660 °C 
Solidus660 °C 
Liquidus660 °C 

Optical Properties
Reflection Coefficient, Visible (0-1)0.87 

References are available for this material.

 


Copyright 1996-2010 by Automation Creations, Inc.  The information provided by MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from Automation Creations, Inc. No warranty, neither expressed nor implied, is given regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of information from MatWeb.