MatWeb, The Online Materials Database

Solvay Advanced Polymers Radel® A AG-330 Polyethersulfone


Subcategory: Polyethersulfone; Polymer; Thermoplastic

Close Analogs: This product line was acquired by Solvay Advanced Polymers from BP Amoco in November 2001.

Key Words: PES

Material Notes:

Data provided by the manufacturer, Amoco Corporation.

For superior long-term performance at high temperatures in severe service environments. It offers especially good toughness, hydrolytic stability, chemical resistance, plus FDA and USDA compliance.

Physical PropertiesMetricEnglishComments
Density1.58 g/cc0.0571 lb/in³ ASTM D792
Water Absorption0.39 %0.39 % in 24 hours per ASTM D570

Mechanical Properties
Tensile Strength, Yield126 MPa18300 psi ASTM D638
Elongation at Break1.9 %1.9 % ASTM D638
Elongation at Yield1.9 %1.9 % ASTM D638
Tensile Modulus8.62 GPa1250 ksi ASTM D638
Flexural Modulus8.07 GPa1170 ksi ASTM D790
Flexural Yield Strength179 MPa26000 psi ASTM D790
Izod Impact, Notched0.7 J/cm1.31 ft-lb/in ASTM D256
Tensile Impact Strength70 kJ/m²33.3 ft-lb/in² 

Electrical Properties
Electrical Resistivity1e+016 ohm-cm1e+016 ohm-cm ASTM D257
Dielectric Constant4.14.1 at 1 kHz; ASTM D150
Dielectric Constant, Low Frequency4.14.1 at 1 kHz; ASTM D150
Dielectric Strength18 kV/mm457 kV/in Thickness 0.32 mm (13 mils); ASTM D149
Dissipation Factor0.0020.002 at 1 kHz; ASTM D150
Dissipation Factor, Low Frequency0.0020.002 at 1 kHz; ASTM D150

Thermal Properties
CTE, linear 20°C31 µm/m-°C17.2 µin/in-°F in flow direction. ASTM E381
CTE, linear 20°C Transverse to Flow31 µm/m-°C17.2 µin/in-°F ASTM E381
Deflection Temperature at 1.8 MPa (264 psi)216 °C421 °F ASTM D648
UL RTI, Electrical190 °C374 °F 1.57 mm
UL RTI, Mechanical with Impact190 °C374 °F 1.57 mm
UL RTI, Mechanical without Impact190 °C374 °F 1.57 mm
Flammability, UL94V-0V-0 0.8 mm
Flammability, UL94V-0V-0 0.8 mm

 


Copyright 1996-2010 by Automation Creations, Inc.  The information provided by MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from Automation Creations, Inc. No warranty, neither expressed nor implied, is given regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of information from MatWeb.