MatWeb, The Online Materials Database
DSM Engineering Plastics Stanyl® TW371 (DAM) Nylon 46 Heat Stabilized, PTFE Lubricated (North America)
Subcategory: Nylon; Nylon 46; Polymer; Thermoplastic
Key Words: Polyamide 46
Material Notes:
Information provided by DSM Engineering Plastics.
| Physical Properties | Original Value | Comments | ||
| ||||
| Density | 1.25 g/cc | ISO 1183 | ||
| Moisture Absorption at Equilibrium | 3.2 % | 50% RH / 23°C; Similar to ISO 62 | ||
Mechanical Properties | ||||
| ||||
| Tensile Strength, Yield | 90 MPa | ISO 527-1/-2 | ||
| Elongation at Yield | 25 % | Nominal Strain at Yield; ISO 527-1/-2 | ||
| Tensile Modulus | 2.9 GPa | ISO 527-1/-2 | ||
| Charpy Impact, Notched | 0.5 J/cm² | ISO 179/1eU | ||
Electrical Properties | ||||
| ||||
| Volume Resistivity | 1e+012 ohm-cm | IEC 60093 | ||
| Comparative Tracking Index | 400 V | IEC 60112 | ||
Thermal Properties | ||||
| ||||
| CTE, linear 20°C | 80 µm/m-°C | parallel to flow; ISO 11359-1/-2 | ||
| CTE, linear 20°C Transverse to Flow | 100 µm/m-°C | ISO 11359-1/-2 | ||
| Melting Point | 295 °C | ISO 11357-1/-3 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 190 °C | ISO 75-1/-2 | ||
| Flammability, UL94 | HB | 3.0 mm | ||
Copyright 1996-2010 by Automation Creations, Inc. The information provided by MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from Automation Creations, Inc. No warranty, neither expressed nor implied, is given regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of information from MatWeb.