MatWeb, The Online Materials Database

SABIC Innovative Plastics VALOX 701 PBT (North America)


Subcategory: Polybutylene Terephthalate (PBT); Polyester, TP; Polymer; Thermoplastic

Close Analogs: Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics.

Material Notes:
Information provided by GE Plastics for their North American product line.

Physical PropertiesMetricEnglishComments
Density1.59 g/cc0.0574 lb/in³ ASTM D 792
Water Absorption0.07 %0.07 % 24 hours @ 73F; ASTM D 570
Linear Mold Shrinkage0.003 - 0.004 cm/cm0.003 - 0.004 in/in Flow, 60-125 mil; ASTM D 955
Linear Mold Shrinkage0.004 - 0.006 cm/cm0.004 - 0.006 in/in Flow, 125-180 mil; ASTM D 955
Linear Mold Shrinkage, Transverse0.004 - 0.006 cm/cm0.004 - 0.006 in/in 60-125 mil; ASTM D 955
Linear Mold Shrinkage, Transverse0.006 - 0.009 cm/cm0.006 - 0.009 in/in 125-180 mil; ASTM D 955

Mechanical Properties
Hardness, Rockwell R119119 ASTM D 785
Tensile Strength @ Break75.8 MPa11000 psi Type I, 0.2 in/min; ASTM D 638
Elongation at Break6 %6 % Type I, 0.2 in/min; ASTM D 638
Flexural Modulus5.52 GPa800 ksi 0.05 in/min, 2" span; ASTM D 790
Flexural Yield Strength124 MPa18000 psi 0.05 in/min, 2" span; ASTM D 790
Izod Impact, Unnotched4.27 J/cm8 ft-lb/in 73F; ASTM D 4812
Izod Impact, Notched0.32 J/cm0.6 ft-lb/in 73F; ASTM D 256

Electrical Properties
Volume Resistivity3.7e+016 ohm-cm3.7e+016 ohm-cm ASTM D 257
Dielectric Constant3.63.6 1 MHz; ASTM D 150
Dielectric Constant3.73.7 100 Hz; ASTM D 150
Dielectric Strength22 kV/mm560 V/mil in air, 125 mils; ASTM D 149
Dielectric Strength25.6 kV/mm650 V/mil in oil, 62 mils; ASTM D 149
Dissipation Factor0.0020.002 100 Hz; ASTM D 150
Dissipation Factor0.010.01 1 MHz; ASTM D 150

Thermal Properties
CTE, linear 68°F34.2 µm/m-°C19 µin/in-°F Flow, -40F to 100F; ASTM E 831
CTE, linear, 212°F (100°C)34.2 µm/m-°C19 µin/in-°F Flow, 140F to 280F; ASTM E 831
Deflection Temperature at 0.46 MPa (66 psi)216 °C420 °F 0.250 inch, unannealed; ASTM D 648
Deflection Temperature at 1.8 MPa (264 psi)199 °C390 °F 0.250 inch, unannealed; ASTM D 648

 


Copyright 1996-2010 by Automation Creations, Inc.  The information provided by MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from Automation Creations, Inc. No warranty, neither expressed nor implied, is given regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of information from MatWeb.