MatWeb, The Online Materials Database
SABIC Innovative Plastics VALOX 780 PBT (North America)
Subcategory: Polybutylene Terephthalate (PBT); Polyester, TP; Polymer; Thermoplastic
Close Analogs: Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics.
Material Notes:
Information provided by GE Plastics for their North American product line.
| Physical Properties | Original Value | Comments | ||
| ||||
| Density | 1.77 g/cc | ASTM D 792 | ||
| Water Absorption | 0.02 % | 24 hours @ 73F; ASTM D 570 | ||
| Linear Mold Shrinkage | 0.003 - 0.004 cm/cm | Flow, 60-125 mil; ASTM D 955 | ||
| Linear Mold Shrinkage | 0.004 - 0.006 cm/cm | Flow, 125-180 mil; ASTM D 955 | ||
| Linear Mold Shrinkage, Transverse | 0.004 - 0.006 cm/cm | 60-125 mil; ASTM D 955 | ||
| Linear Mold Shrinkage, Transverse | 0.006 - 0.008 cm/cm | 125-180 mil; ASTM D 955 | ||
Mechanical Properties | ||||
| ||||
| Hardness, Rockwell R | 116 | ASTM D 785 | ||
| Tensile Strength @ Break | 14500 psi | Type I, 0.2 in/min; ASTM D 638 | ||
| Flexural Modulus | 1.5e+006 psi | 0.05 in/min, 2" span; ASTM D 790 | ||
| Flexural Strength | 24000 psi | 0.05 in/min, 2" span; ASTM D 790 | ||
| Izod Impact, Unnotched | 7 ft-lb/in | 73F; ASTM D 4812 | ||
| Izod Impact, Notched | 1 ft-lb/in | 73F; ASTM D 256 | ||
Electrical Properties | ||||
| ||||
| Volume Resistivity | 3.5e+015 ohm-cm | ASTM D 257 | ||
| Dielectric Constant | 3.8 | 1 MHz; ASTM D 150 | ||
| Dielectric Constant | 3.9 | 100 Hz; ASTM D 150 | ||
| Dielectric Strength | 460 V/mil | in air, 125 mils; ASTM D 149 | ||
| Dielectric Strength | 650 V/mil | in oil, 62 mils; ASTM D 149 | ||
| Dissipation Factor | 0.007 | 100 Hz; ASTM D 150 | ||
| Dissipation Factor | 0.02 | 1 MHz; ASTM D 150 | ||
| Arc Resistance | 60 - 120 sec | Tungsten (+/- 0.125 inch); PLC Code 6; ASTM D 495 | ||
| Comparative Tracking Index | 175 - 250 V | (+/- 0.125 inch); PLC Code 3; UL 746A | ||
| Hot Wire Ignition, HWI | 60 - 120 sec | (+/- 0.125 inch); PLC Code 1; UL 746A | ||
| High Amp Arc Ignition, HAI | Max 15 arcs | Surface (+/- 0.125 inch); PLC Code 4; UL 746A | ||
| High Voltage Arc-Tracking Rate, HVTR | 10 - 25.4 mm/min | (+/- 0.125 inch); PLC Code 1; UL 746A | ||
Thermal Properties | ||||
| ||||
| CTE, linear 68°F | 14 µin/in-°F | Flow, -40F to 100F; ASTM E 831 | ||
| CTE, linear, 212°F (100°C) | 16 µin/in-°F | Flow, 140F to 280F; ASTM E 831 | ||
| Deflection Temperature at 0.46 MPa (66 psi) | 410 °F | 0.250 inch, unannealed; ASTM D 648 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 380 °F | 0.250 inch, unannealed; ASTM D 648 | ||
| UL RTI, Electrical | 130 °C | UL 746B | ||
| UL RTI, Mechanical with Impact | 130 °C | UL 746B | ||
| UL RTI, Mechanical without Impact | 140 °C | UL 746B | ||
| Flammability, UL94 | V-0 | 0.032 in. | ||
Descriptive Properties | ||||
| ||||
| CSA File No. | LS88480 | |||
| UL File Number, USA | E121562 | |||
Copyright 1996-2010 by Automation Creations, Inc. The information provided by MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from Automation Creations, Inc. No warranty, neither expressed nor implied, is given regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of information from MatWeb.