MatWeb, The Online Materials Database

SABIC Innovative Plastics VALOX VX4510 PBT (Europe)


Subcategory: Polybutylene Terephthalate (PBT); Polyester, TP; Polymer; Thermoplastic

Close Analogs: Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics.

Material Notes:
Information provided by GE Plastics for their European product line.

Physical PropertiesOriginal ValueComments
Density1.52 g/cc ISO 1183
Moisture Absorption at Equilibrium0.08 % (23 C / 50% RH) 1L; ISO 15512
Water Absorption at Saturation0.27 % 23C; ISO 62
Linear Mold Shrinkage0.006 - 0.01 cm/cm Flow; ASTM D 955
Linear Mold Shrinkage, Transverse0.007 - 0.012 cm/cm ASTM D 955
Melt Flow17 g/10 min cm3/10min; Melt Volume Rate, MVR at 250C/2.16 kg; ISO 1133

Mechanical Properties
Hardness, H358/30105 MPa ISO 2039/1
Tensile Strength, Ultimate85 MPa 5 mm/min; ISO 527
Elongation at Break3 % 5 mm/min; ISO 527
Tensile Modulus5 GPa 1 mm/min; ISO 527
Flexural Modulus4.5 GPa 2 mm/min; ISO 178
Flexural Strength130 MPa 2 mm/min; ISO 178
Izod Impact, Notched (ISO)4 kJ/m² 80*10*4 +23 C; ISO 180/ 1A
Izod Impact, Unnotched (ISO)20 kJ/m² 80*10*4 +23 C; ISO 180/ 1U
Izod Impact, Unnotched Low Temp (ISO)20 kJ/m² 80*10*4 -30 C; ISO 180/ 1U
Izod Impact, Notched, Low Temp (ISO)4 kJ/m² 80*10*4 -30 C; ISO 180/ 1A
Charpy Impact Unnotched2.5 J/cm² 23C, Unnotch Edgew 80*10*4 sp=62; ISO 179/1eU
Charpy Impact, Notched, Low Temp0.4 J/cm² at -30C, V-notch Edgew 80*10*4 sp=62; ISO 179/1eA
Charpy Impact, Unnotched Low Temp2 J/cm² at -30C, Unnotch Edgew 80*10*4 sp=62; ISO 179/1eU
Charpy Impact, Notched0.4 J/cm² 23C, V-notch Edgew 80*10*4 sp=62; ISO 179/1eA
Taber Abrasion, mg/1000 Cycles45 CS-17, 1 kg; GE Test

Thermal Properties
CTE, linear 20°C50 µm/m-°C 23C-80C, flow; ISO 11359-2
CTE, linear 20°C Transverse to Flow160 µm/m-°C 23C-80C; ISO 11359-2
Deflection Temperature at 0.46 MPa (66 psi)205 °C HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm; ISO 75/Be
Deflection Temperature at 1.8 MPa (264 psi)195 °C HDT/Ae, 1.82 MPa Edgew 120*10*4 sp=100mm; ISO 75/Ae
Vicat Softening Point195 °C B/50; ISO 306
Vicat Softening Point197 °C B/120; ISO 306
Vicat Softening Point215 °C A/50; ISO 306
Flammability, UL94V-0 1 mm; UL 94 by GE

Descriptive Properties
Ball Pressure Test, 125 C +/- 2 CPASSES IEC 60035-1

 


Copyright 1996-2010 by Automation Creations, Inc.  The information provided by MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from Automation Creations, Inc. No warranty, neither expressed nor implied, is given regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of information from MatWeb.