MatWeb, The Online Materials Database

SABIC Innovative Plastics VALOX 3007 PBT (Europe)


Subcategory: Polybutylene Terephthalate (PBT); Polyester, TP; Polymer; Thermoplastic

Close Analogs: Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics.

Material Notes:
Information provided by GE Plastics for their European product line.

Physical PropertiesMetricEnglishComments
Density1.31 g/cc0.0473 lb/in³ ASTM D 792
Density1.31 g/cc0.0473 lb/in³ ISO 1183
Moisture Absorption at Equilibrium0.08 %0.08 % (23 C / 50% RH) 1L; ISO 15512
Water Absorption at Saturation0.34 %0.34 % 23C; ISO 62
Linear Mold Shrinkage0.011 - 0.018 cm/cm0.011 - 0.018 in/in Flow; ASTM D 955
Linear Mold Shrinkage, Transverse0.009 - 0.018 cm/cm0.009 - 0.018 in/in ASTM D 955
Melt Flow8 g/10 min8 g/10 min cm3/10min; Melt Volume Rate, MVR at 250C/1.2 kg; ISO 1133

Mechanical Properties
Hardness, H358/30105 MPa15200 psi ISO 2039/1
Tensile Strength, Ultimate25 MPa3630 psi 50 mm/min; ISO 527
Tensile Strength, Yield50 MPa7250 psi 50 mm/min; ISO 527
Elongation at Break50 %50 % 50 mm/min; ISO 527
Elongation at Yield3 %3 % 50 mm/min; ISO 527
Tensile Modulus2.3 GPa334 ksi 1 mm/min; ISO 527
Flexural Modulus2.2 GPa319 ksi 2 mm/min; ISO 178
Flexural Yield Strength80 MPa11600 psi 2 mm/min; ISO 178
Izod Impact, Notched (ISO)6 kJ/m²2.86 ft-lb/in² 80*10*4 +23 C; ISO 180/ 1A
Izod Impact, Unnotched (ISO)NBNB 80*10*4 +23 C; ISO 180/ 1U
Izod Impact, Unnotched Low Temp (ISO)NBNB 80*10*4 -30 C; ISO 180/ 1U
Izod Impact, Notched, Low Temp (ISO)5 kJ/m²2.38 ft-lb/in² 80*10*4 -30 C; ISO 180/ 1A
Charpy Impact UnnotchedNBNB 23C, Unnotch Edgew 80*10*4 sp=62; ISO 179/1eU
Charpy Impact, Notched, Low Temp0.6 J/cm²2.86 ft-lb/in² at -30C, V-notch Edgew 80*10*4 sp=62; ISO 179/1eA
Charpy Impact, Unnotched Low TempNBNB at -30C, Unnotch Edgew 80*10*4 sp=62; ISO 179/1eU
Charpy Impact, Notched0.7 J/cm²3.33 ft-lb/in² 23C, V-notch Edgew 80*10*4 sp=62; ISO 179/1eA

Electrical Properties
Volume ResistivityMin 1e+015 ohm-cmMin 1e+015 ohm-cm IEC 60093
Surface Resistivity per Square1e+016 ohm1e+016 ohm ROA; IEC 60093
Dielectric Constant33 50 Hz; IEC 60250
Dielectric Constant33 1 MHz; IEC 60250
Dielectric Strength16 kV/mm406 kV/in in oil, 3.2 mm; IEC 60243-1
Dielectric Strength23 kV/mm584 kV/in in oil, 1.6 mm; IEC 60243-1
Dielectric Strength29 kV/mm737 kV/in in oil, 0.8 mm; IEC 60243-1
Dissipation Factor0.0020.002 50 Hz; IEC 60250
Dissipation Factor0.020.02 1 MHz; IEC 60250
Comparative Tracking Index350 V350 V M; IEC 60112/3rd
Comparative Tracking Index600 V600 V IEC 60112/3rd
Comparative Tracking Index600 V600 V Stand. Black; IEC 60112/3rd
Comparative Tracking Index600 V600 V Electr Grey; IEC 60112/3rd

Thermal Properties
CTE, linear 20°C130 µm/m-°C72.2 µin/in-°F 23C-80C, flow; ISO 11359-2
CTE, linear 20°C Transverse to Flow130 µm/m-°C72.2 µin/in-°F 23C-80C; ISO 11359-2
Deflection Temperature at 0.46 MPa (66 psi)120 °C248 °F HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm; ISO 75/Be
Deflection Temperature at 1.8 MPa (264 psi)50 °C122 °F HDT/Ae, 1.82 MPa Edgew 120*10*4 sp=100mm; ISO 75/Ae
Vicat Softening Point170 °C338 °F B/120; ISO 306
Vicat Softening Point173 °C343 °F B/50; ISO 306
UL RTI, Electrical75 °C167 °F UL 746B
UL RTI, Mechanical with Impact75 °C167 °F UL 746B
UL RTI, Mechanical without Impact75 °C167 °F UL 746B
Flammability, UL94HBHB 1.5 mm
Glow Wire Test750 °C1380 °F Passes at 3.2 mm; EDF HN60S02
Glow Wire Test750 °C1380 °F Passes at 3.2 mm; IEC 60695-2-1
Glow Wire Test850 °C1560 °F Passes at 1 mm; EDF HN60S02
Glow Wire Test850 °C1560 °F Passes at 1 mm; IEC 60695-2-1

Descriptive Properties
Ball Pressure Test, 125 C +/- 2 CPASSES IEC 60035-1

 


Copyright 1996-2010 by Automation Creations, Inc.  The information provided by MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from Automation Creations, Inc. No warranty, neither expressed nor implied, is given regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of information from MatWeb.