MatWeb, The Online Materials Database

SABIC Innovative Plastics VALOX 5510 PBT (Europe)


Subcategory: Polybutylene Terephthalate (PBT); Polyester, TP; Polymer; Thermoplastic

Close Analogs: Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics.

Material Notes:
Information provided by GE Plastics for their European product line.

Physical PropertiesOriginal ValueComments
Density1.4 g/cc ISO 1183
Density1.4 g/cc ASTM D 792
Moisture Absorption at Equilibrium0.08 % (23 C / 50% RH) 1L; ISO 15512
Water Absorption at Saturation0.22 % 23C; ISO 62
Linear Mold Shrinkage0.003 - 0.008 cm/cm Flow; ASTM D 955
Linear Mold Shrinkage, Transverse0.005 - 0.009 cm/cm ASTM D 955
Melt Flow12 g/10 min cm3/10min; Melt Volume Rate, MVR at 250C/2.16 kg; ISO 1133

Mechanical Properties
Tensile Strength, Ultimate75 MPa 5 mm/min; ISO 527
Elongation at Break3 % 5 mm/min; ISO 527
Tensile Modulus4.2 GPa 1 mm/min; ISO 527
Flexural Modulus4.1 GPa 2 mm/min; ISO 178
Flexural Strength115 MPa 2 mm/min; ISO 178
Flexural Yield Strength115 MPa 2 mm/min; ISO 178
Izod Impact, Notched (ISO)5 kJ/m² 80*10*4 +23 C; ISO 180/ 1A
Izod Impact, Unnotched (ISO)25 kJ/m² 80*10*4 +23 C; ISO 180/ 1U
Izod Impact, Unnotched Low Temp (ISO)20 kJ/m² 80*10*4 -30 C; ISO 180/ 1U
Izod Impact, Notched, Low Temp (ISO)4.5 kJ/m² 80*10*4 -30 C; ISO 180/ 1A
Charpy Impact Unnotched3 J/cm² 23C, Unnotch Edgew 80*10*4 sp=62; ISO 179/1eU
Charpy Impact, Notched, Low Temp0.4 J/cm² at -30C, V-notch Edgew 80*10*4 sp=62; ISO 179/1eA
Charpy Impact, Unnotched Low Temp2.5 J/cm² at -30C, Unnotch Edgew 80*10*4 sp=62; ISO 179/1eU
Charpy Impact, Notched0.4 J/cm² 23C, V-notch Edgew 80*10*4 sp=62; ISO 179/1eA

Electrical Properties
Volume ResistivityMin 1e+015 ohm-cm IEC 60093
Surface Resistivity per SquareMin 1e+015 ohm ROA; IEC 60093
Dielectric Constant2.9 1 MHz; IEC 60250
Dielectric Constant3 50 Hz; IEC 60250
Dielectric Strength15 kV/mm in oil, 3.2 mm; IEC 60243-1
Dielectric Strength23 kV/mm in oil, 1.6 mm; IEC 60243-1
Dielectric Strength28 kV/mm in oil, 0.8 mm; IEC 60243-1
Dissipation Factor0.0014 50 Hz; IEC 60250
Dissipation Factor0.012 1 MHz; IEC 60250
Comparative Tracking Index200 V Stand. Black; IEC 60112/3rd
Comparative Tracking Index250 V Electr Grey; IEC 60112/3rd
Comparative Tracking Index250 V IEC 60112/3rd

Thermal Properties
CTE, linear 20°C60 µm/m-°C 23C-80C, flow; ISO 11359-2
CTE, linear 20°C Transverse to Flow80 µm/m-°C 23C-80C; ISO 11359-2
Deflection Temperature at 0.46 MPa (66 psi)204 °C HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm; ISO 75/Be
Deflection Temperature at 1.8 MPa (264 psi)145 °C HDT/Ae, 1.82 MPa Edgew 120*10*4 sp=100mm; ISO 75/Ae
Vicat Softening Point175 °C B/120; ISO 306
Vicat Softening Point175 °C B/50; ISO 306
Vicat Softening Point215 °C Rate B; ASTM D 1525
Flammability, UL94V-2 1.6 mm; UL 94 by GE
Flammability Test1 mm; IEC Needle Flame Test, 10 s , passes at; IEC 60695-2-2
Oxygen Index26 % ISO 4589
Glow Wire Test960 °C Passes at 1 mm; EDF HN60S02
Glow Wire Test960 °C Passes at 3.2 mm; IEC 60695-2-1

Descriptive Properties
Ball Pressure Test, 125 C +/- 2 CPASSES IEC 60035-1

 


Copyright 1996-2010 by Automation Creations, Inc.  The information provided by MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from Automation Creations, Inc. No warranty, neither expressed nor implied, is given regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of information from MatWeb.