MatWeb, The Online Materials Database

SABIC Innovative Plastics VALOX 815UX PBT (Europe)


Subcategory: Polybutylene Terephthalate (PBT); Polyester, TP; Polymer; Thermoplastic

Close Analogs: Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics.

Material Notes:
Information provided by GE Plastics for their European product line.

Physical PropertiesMetricEnglishComments
Density1.43 g/cc0.0517 lb/in³ ASTM D 792
Density1.43 g/cc0.0517 lb/in³ ISO 1183
Moisture Absorption at Equilibrium0.06 %0.06 % (23 C / 50% RH) 1L; ISO 15512
Water Absorption at Saturation0.26 %0.26 % 23C; ISO 62
Linear Mold Shrinkage0.004 - 0.008 cm/cm0.004 - 0.008 in/in Flow; ASTM D 955
Linear Mold Shrinkage, Transverse0.006 - 0.01 cm/cm0.006 - 0.01 in/in ASTM D 955
Melt Flow10 g/10 min10 g/10 min cm3/10min; Melt Volume Rate, MVR at 265C/1.2 kg; ISO 1133

Mechanical Properties
Hardness, H358/30101 MPa14600 psi ISO 2039/1
Tensile Strength, Ultimate85 MPa12300 psi 5 mm/min; ISO 527
Elongation at Break3 %3 % 5 mm/min; ISO 527
Tensile Modulus5.8 GPa841 ksi 1 mm/min; ISO 527
Flexural Modulus4.7 GPa682 ksi 2 mm/min; ISO 178
Flexural Strength135 MPa19600 psi 2 mm/min; ISO 178
Izod Impact, Notched (ISO)6 kJ/m²2.86 ft-lb/in² 80*10*4 +23 C; ISO 180/ 1A
Izod Impact, Unnotched (ISO)20 kJ/m²9.52 ft-lb/in² 80*10*4 +23 C; ISO 180/ 1U
Izod Impact, Unnotched Low Temp (ISO)20 kJ/m²9.52 ft-lb/in² 80*10*4 -30 C; ISO 180/ 1U
Izod Impact, Notched, Low Temp (ISO)5 kJ/m²2.38 ft-lb/in² 80*10*4 -30 C; ISO 180/ 1A
Charpy Impact Unnotched2.5 J/cm²11.9 ft-lb/in² 23C, Unnotch Edgew 80*10*4 sp=62; ISO 179/1eU
Charpy Impact, Notched, Low Temp0.4 J/cm²1.9 ft-lb/in² at -30C, V-notch Edgew 80*10*4 sp=62; ISO 179/1eA
Charpy Impact, Unnotched Low Temp2.5 J/cm²11.9 ft-lb/in² at -30C, Unnotch Edgew 80*10*4 sp=62; ISO 179/1eU
Charpy Impact, Notched0.5 J/cm²2.38 ft-lb/in² 23C, V-notch Edgew 80*10*4 sp=62; ISO 179/1eA
Taber Abrasion, mg/1000 Cycles1717 CS-17, 1 kg; GE Test

Electrical Properties
Volume ResistivityMin 1e+015 ohm-cmMin 1e+015 ohm-cm IEC 60093
Surface Resistivity per SquareMin 1e+015 ohmMin 1e+015 ohm ROA; IEC 60093
Dielectric Constant2.92.9 1 MHz; IEC 60250
Dielectric Constant33 50 Hz; IEC 60250
Dielectric Strength16 kV/mm406 kV/in in oil, 3.2 mm; IEC 60243-1
Dissipation Factor0.0010.001 50 Hz; IEC 60250
Dissipation Factor0.0140.014 1 MHz; IEC 60250
Comparative Tracking Index300 V300 V IEC 60112/3rd

Thermal Properties
CTE, linear 20°C55 µm/m-°C30.6 µin/in-°F 23C-80C, flow; ISO 11359-2
CTE, linear 20°C Transverse to Flow85 µm/m-°C47.2 µin/in-°F 23C-80C; ISO 11359-2
Thermal Conductivity0.19 W/m-K1.32 BTU-in/hr-ft²-°F ISO 8302
Deflection Temperature at 0.46 MPa (66 psi)215 °C419 °F HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm; ISO 75/Be
Deflection Temperature at 1.8 MPa (264 psi)175 °C347 °F HDT/Ae, 1.82 MPa Edgew 120*10*4 sp=100mm; ISO 75/Ae
Vicat Softening Point195 °C383 °F A/50; ISO 306
Vicat Softening Point200 °C392 °F B/50; ISO 306
Vicat Softening Point215 °C419 °F B/120; ISO 306
Flammability, UL94HBHB 1.5 mm
Glow Wire Test750 °C1380 °F Passes at 3.2 mm; IEC 60695-2-1

Descriptive Properties
Ball Pressure Test, 125 C +/- 2 CPASSES IEC 60035-1

 


Copyright 1996-2010 by Automation Creations, Inc.  The information provided by MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from Automation Creations, Inc. No warranty, neither expressed nor implied, is given regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of information from MatWeb.