|
MatWeb, The Online Materials Database
Celanese Vectra® H130 30% Glass Filled Liquid Crystal Polymer (LCP)
Subcategory: Filled/Reinforced Thermoplastic; Liquid Crystal Polymer (LCP); Polymer; Thermoplastic
Material Notes: Description: An easily processable LCP with the highest temperature capability 30% glass filled Data provided by Ticona.
Physical Properties | Original Value | Comments |
|
Density | 1.6 g/cc | ISO 1183 |
Linear Mold Shrinkage | 0.001 cm/cm | ISO 294-4 |
Linear Mold Shrinkage, Transverse | 0.005 cm/cm | ISO 294-4 |
Mechanical Properties |
|
Hardness, Rockwell M | 74 | ISO 2039-2 |
Tensile Strength at Break | 170 MPa | 5 mm/min; ISO 527-2/1A |
Elongation at Break | 1.5 % | 5mm/min; ISO 527-2/1A |
Tensile Modulus | 16.5 GPa | 1 mm/min; ISO 527-2/1A |
Flexural Modulus | 16.4 GPa | ISO 178 |
Flexural Strength | 245 MPa | ISO 178 |
Izod Impact, Notched (ISO) | 20 kJ/m² | ISO 180/1A |
Izod Impact, Unnotched (ISO) | 27 kJ/m² | ISO 180/1U |
Charpy Impact Unnotched | 2.9 J/cm² | ISO 179/1eU |
Charpy Impact, Notched | 2.4 J/cm² | ISO 179/1eA |
Electrical Properties |
|
Surface Resistance | 1e+015 ohm | IEC 60093 |
Dielectric Constant | 4 | 100 Hz; IEC 60250 |
Dielectric Constant | 5.6 | 1 MHz; IEC 60250 |
Dielectric Strength | 39 kV/mm | IEC 60243-1 |
Dissipation Factor | 0.02 | 100Hz; IEC 60250 |
Dissipation Factor | 0.0221 | 1MHz; IEC 60250 |
Comparative Tracking Index | 175 V | IEC 60112 |
Thermal Properties |
|
CTE, linear 20°C | 2 µm/m-°C | ISO 11359-2 |
CTE, linear 20°C Transverse to Flow | 22 µm/m-°C | ISO 11359-2 |
Melting Point | 330 °C | ISO 11357-1,2,3 |
Deflection Temperature at 1.8 MPa (264 psi) | 298 °C | ISO 75-1, -2 |
Deflection Temperature at 8.0 MPa | 233 °C | ISO 75-1, -2 |
Vicat Softening Point | 221 °C | ISO 306 |
Flammability, UL94 | V-0 | thickness h |
Oxygen Index | 50 % | ISO 4589 |
Processing Properties |
|
Rear Barrel Temperature | 315 - 325 °C | |
Middle Barrel Temperature | 325 - 335 °C | |
Front Barrel Temperature | 330 - 340 °C | |
Nozzle Temperature | 335 - 345 °C | |
Melt Temperature | 335 - 345 °C | |
Mold Temperature | 80 - 120 °C | |
|
|
|
Copyright 1996-2010 by Automation Creations, Inc. The information provided by
MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not
be reproduced either electronically, photographically or substantively without permission from
Automation Creations, Inc. No warranty, neither expressed nor implied, is given
regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of
information from MatWeb.
|
|