MatWeb, The Online Materials Database

LNP (SABIC Innovative Plastics) ULTEM® SMU6303 Polyetherimide, 5% Glass Fiber Reinforcement, 5% PTFE Lubricant


Subcategory: Filled/Reinforced Thermoplastic; Polyetherimide; Polymer; Thermoplastic

Close Analogs: Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics.

Material Notes:
Will be UNTW05.

  • Features: Lubricated, High Heat Resistance, Good Wear Resistance, Low to None Ion Content, Electrically Conductive
  • Forms: Pellets
  • Processing Method: Injection Molding
Information provided by LNP, a GE Plastics Company.

Physical PropertiesMetricEnglishComments
Specific Gravity1.33 g/cc0.048 lb/in³ ASTM D792

Mechanical Properties
Tensile Strength at Break96.5 MPa14000 psi Type I, 5 mm/min; ASTM D638
Tensile Strength, Yield110 MPa16000 psi Type I, 5 mm/min; ASTM D638
Elongation at Break11 %11 % Type I, 5 mm/min; ASTM D638
Flexural Modulus2.599 GPa377 ksi (50.8 mm Span) 1mm/min; ASTM D790
Flexural Strength174 MPa25200 psi at Break, (50.8 mm Span) 1mm/min; ASTM D790
Izod Impact, Notched0.534 J/cm1 ft-lb/in ASTM D256
Izod Impact, Unnotched6.83 J/cm12.8 ft-lb/in ASTM D256

Thermal Properties
Deflection Temperature at 0.46 MPa (66 psi)196 °C385 °F Unannealed (3.18 mm); ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)189 °C372 °F Unannealed (3.18 mm); ASTM D648

Processing Properties
Rear Barrel Temperature332 - 399 °C630 - 750 °F 
Middle Barrel Temperature338 - 399 °C640 - 750 °F 
Front Barrel Temperature343 - 399 °C649 - 750 °F 
Nozzle Temperature343 - 399 °C649 - 750 °F 
Melt Temperature349 - 399 °C660 - 750 °F 
Mold Temperature135 - 163 °C275 - 325 °F 
Drying Temperature149 °C300 °F 
Dry TimeMax 24 hourMax 24 hour 
Moisture Content0.02 %0.02 % Suggested
Back Pressure0.345 - 0.689 MPa50 - 99.9 psi 
Clamp Pressure41 - 69 MPa5950 - 10000 psi 
Shot Size40 - 60 %40 - 60 % Suggested
Vent Depth0.0025 - 0.0076 cm0.000984 - 0.00299 in 
Screw Speed40 - 70 rpm40 - 70 rpm 

 


Copyright 1996-2010 by Automation Creations, Inc.  The information provided by MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from Automation Creations, Inc. No warranty, neither expressed nor implied, is given regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of information from MatWeb.