MatWeb, The Online Materials Database

RTP Company RTP 1407 N Polyethersulfone (PES) Glass Fiber - High Viscosity


Subcategory: Polyethersulfone; Polymer; Thermoplastic

Physical PropertiesMetricEnglishComments
Specific Gravity1.68 g/cc0.0607 lb/in³ ASTM D792
Filler Content40 %40 % Primary Additive
Water Absorption0.3 %0.3 % 24 hrs; 23°C; ASTM D570
Linear Mold Shrinkage0.001 cm/cm0.001 in/in 1/8 in (3.2 mm); ASTM D955

Mechanical Properties
Hardness, Rockwell R123123 ASTM D785
Tensile Strength @ Break159 MPa23000 psi ASTM D638
Elongation at Break2.1 %2.1 % ASTM D638
Tensile Modulus12.4 GPa1800 ksi ASTM D638
Flexural Modulus11.7 GPa1700 ksi ASTM D638
Flexural Yield Strength224 MPa32500 psi ASTM D790
Compressive Yield Strength152 MPa22000 psi ASTM D695
Izod Impact, Unnotched6.67 J/cm12.5 ft-lb/in 1/8 in (3.2 mm); ASTM D4812
Izod Impact, Notched0.961 J/cm1.8 ft-lb/in 1/8 in (3.2 mm); ASTM D256

Electrical Properties
Volume ResistivityMin 1e+012 ohm-cmMin 1e+012 ohm-cm ASTM D257
Dielectric Constant4.34.3 1 MHz; Dry; ASTM D150
Dielectric Strength14.6 kV/mm370 V/mil S/T; in oil; ASTM D149
Dissipation Factor0.0070.007 1 MHz; Dry; ASTM D150
Arc Resistance80 sec80 sec ASTM D495

Thermal Properties
CTE, linear 68°F25.2 µm/m-°C14 µin/in-°F Flow Direction; ASTM E831
Thermal Conductivity0.36 W/m-K2.5 BTU-in/hr-ft²-°F Through Plane; ASTM E1530
Deflection Temperature at 0.46 MPa (66 psi)221 °C430 °F ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)216 °C420 °F ASTM D648
Flammability, UL94V-0V-0 1/16 in (1.5 mm)

Processing Properties
Melt Temperature343 - 377 °C650 - 710 °F 
Mold Temperature135 - 177 °C275 - 350 °F 
Drying Temperature149 °C300 °F 6 hrs
Moisture Content0.04 %0.04 % 
Dew Point-31.7 °C-25 °F 
Injection Pressure68.9 - 103 MPa10000 - 15000 psi 

 


Copyright 1996-2010 by Automation Creations, Inc.  The information provided by MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from Automation Creations, Inc. No warranty, neither expressed nor implied, is given regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of information from MatWeb.