MatWeb, The Online Materials Database

BASF Elastollan® 695A15 Polyester Type Polyurethane Elastomer


Subcategory: Elastomer, TPE; Polymer; Polyurethane, TP; Thermoplastic

Key Words: TPU Rubbers

Material Notes:
This grade contains a hydrolytic stabilizer. The Elastollan 600 Series of products listed are products that are part of a new series of polyester-based thermoplastic polyurethanes (TPU). They are specifically formulated for extruded profile, sheet and film applications. They exhibit excellent abrasion resistance, toughness and transparency. With respect to processing they are generally easy to process and have a very wide processing window. In some cases it is as high as 25 to 30°C.

As with all TPU products this grade must be dried prior to processing.

Property values below are typical values based on molded plaques cured 20 hours at 100°C before testing. Information provided by BASF Corporation.

Physical PropertiesOriginal ValueComments
Density1.23 g/cc ASTM D792

Mechanical Properties
Hardness, Shore A93 ASTM D2240
Tensile Strength, Ultimate37.5 MPa ASTM D412
Tensile Strength, Yield11.8 MPa Tensile stress at 100% elongation.; ASTM D-412
Tensile Strength, Yield24.4 MPa Tensile stress at 300% elongation.; ASTM D-412
Elongation at Break510 % ASTM D412
Tear Strength135 kN/m ASTM D624
Taber Abrasion, mg/1000 Cycles25 H-18 wheel; ASTM D-1044.

Processing Properties
Drying Temperature80 - 90 °C Must be dried. Typical condition.
Dry Time2 - 4 hour 
Moisture ContentMax 0.03 % 

 


Copyright 1996-2010 by Automation Creations, Inc.  The information provided by MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from Automation Creations, Inc. No warranty, neither expressed nor implied, is given regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of information from MatWeb.