MatWeb, The Online Materials Database

BASF Elastollan® M88A55 Polyester Type Polyurethane Elastomer


Subcategory: Elastomer, TPE; Polymer; Polyurethane, TP; Thermoplastic

Key Words: TPU Rubbers

Material Notes:
The Elastollan M Series of products listed are part of a new series of polyester-based thermoplastic polyurethanes (TPU). They are specifically formulated for fast cycling in Injection Molding applications. Cycle time improvements of up to 25% over standard polyester grade urethanes can be obtained with M-series grades. They exhibit excellent abrasion resistance, toughness, and resistance to fuels.

As with all TPU products this grade must be dried prior to processing.

Property values below are typical values based on molded plaques cured 20 hours at 100°C before testing. Information provided by BASF Corporation.

Physical PropertiesOriginal ValueComments
Density1.27 g/cc ASTM D792

Mechanical Properties
Hardness, Shore A88 ASTM D2240
Tensile Strength, Ultimate33 MPa ASTM D412
Tensile Strength, Yield15.5 MPa Tensile stress at 300% elongation.; ASTM D-412
Tensile Strength, Yield7 MPa Tensile stress at 100% elongation.; ASTM D-412
Elongation at Break600 % ASTM D412
Tear Strength110 kN/m ASTM D624
Taber Abrasion, mg/1000 Cycles25 H-18 wheel; ASTM D-1044.

Processing Properties
Drying Temperature80 - 90 °C Must be dried. Typical condition.
Dry Time2 - 4 hour 
Moisture ContentMax 0.03 % 

 


Copyright 1996-2010 by Automation Creations, Inc.  The information provided by MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from Automation Creations, Inc. No warranty, neither expressed nor implied, is given regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of information from MatWeb.