MatWeb - Material Property Data 用 MatWeb 登广告!    Register Now
越过59,000 以上, 金属、塑料、陶瓷和合成物的数据资料库。
MatWeb - Material Property Data 主页  •  搜寻  •  工具  •  供应商  •  文件夹  •  有关我们  •  常用问题  •  登录   •  English English English 
  搜寻方法:  高级先进 | 材料类型 | 特性 | 构成份  | 商标  | 制造商
    Search

Subscribe to FREE Trade Publications!

Lucas-Milhaupt Premabraze 130 Gold Based Brazing Alloy

 

Subcategory: Nickel Alloy; Nonferrous Metal; Gold Alloy; Solder/Braze Alloy

Material Notes:

Applications:Premabraze 130 can be used on any of the common nickel- and ironbase heat-resistant alloys, such as in jet engines, etc. Because of its low penetration of the base metal, it is well suited for brazing thin section, such as thin-wall tubing or electronic vacuum tubes. It has also been used extensively for nuclear power applications, except in high flux regions and in contact with such liquid metals as sodium and potassium.

Characteristics:Premabraze 130 wets a wide range of high temperature iron and nickel based alloys such as the stainless steels, A286, Inconel and Inconel X very well. It does not alloy excessively with these materials nor produce the severe intergranular penetration normally associated with the nickel based brazing alloys contained boron.

A minimum brazing temperature of 1800EF (980EC) is suggested for furnace brazing in hydrogen or dissociated ammonia having a -40EF dew point or drier on 300 and 400 series stainless steels which do not contain additions of Ti or Al.

Stainless steels of the 17-7 PH variety require dew points of -70EF or drier for furnace brazing.

Brazing is done in inert atmospheres or in vacuum.

For torch brazing, protection with Handy Hi-Temp Flux is recommended. Where base metals containing elements which produce refractory oxides are encountered, Handy Hi-Temp Flux Boron Modified will promote better wetting.

Joint clearances of 0.0015" - 0.003" are normally suggested.

Gold and nickel are completely soluble in all proportions at temperatures above 1490EF (810EC) and this specific composition (82% Au- 18% Ni) represents the minimum in this system so that the solidum (melting point) and the liquidus (flow point) are identical.

Normally, Premabraze 130 would not be used for joining copper based and silver based alloys. In addition to have a flow point very close to the melting point of silver, and above that of the silver-copper eutectic, it would alloy quite readily with copper based alloys.

Specifications:Premabraze 130 conforms to the following specifications: SAE-AMS 4787, AWS A5-8 BAu-4, ASME Boiler & Pressure Vessel Code Sec II-C SFA-5.8 BAu-4

Information provided by Lucas-Milhaupt, Inc.

Available Properties
  • Specific Gravity
  • Tensile Strength @ Break
  • Tensile Strength, Ultimate at Elevated Temperature
  • Electrical Resistivity
  • Solidus
  • Liquidus
  • Processing Temperature
  • Color
  
Property Data

This page displays only the text
of a material data sheet.

To see MatWeb's complete data
sheet for this material (including
material property data, metal
compositions, material suppliers,
etc
), please click the button below.

<meta http-equiv=Content-Type content="text/html; charset=UTF-8">
请读关于材料数据的使用许可协议和我们的隐私权。询问或评论有关 MatWeb? 请与webmaster@matweb.com 联系。我们感谢您对 MatWeb的参与。

本站点由 Automation Creations, Inc. 设计和维护。这个网站的内容, MatWeb 的商标,与 "MatWeb" 由 Automation Creations, Inc.版权1996-2006拥有 。 MatWeb 意欲为个人使用 , 非商业用途。这个站点的内容、结果和技术数据,未经由 Automation Creations, Inc. 允许, 不可以被电子,摄影或实质上地再生产或自动化创作。