MatWeb - Material Property Data 用 MatWeb 登广告!    Register Now
越过59,000 以上, 金属、塑料、陶瓷和合成物的数据资料库。
MatWeb - Material Property Data 主页  •  搜寻  •  工具  •  供应商  •  文件夹  •  有关我们  •  常用问题  •  登录   •  English English English 
  搜寻方法:  高级先进 | 材料类型 | 特性 | 构成份  | 商标  | 制造商
    Search

Subscribe to FREE Trade Publications!

BASF Petra® 239 BK-112, 22/13% Glass/Mineral-Filled PET

 

Subcategory: Polyester, TP; Polyethylene Terephthalate (PET); Thermoplastic; Polymer

Close Analogs: This grade is no longer a part of the BASF NAFTA standard product line.

Material Notes:
Petra 239 BK-112 is a 35% mineral and glass modified, pigmented black, paintable polyethylene terephthalate injection molding compound offering an excellent balance of engineering properties in combination with high temperature performance, dimensional stability, low warp and resistance to sink-mark formation.

Petra 239 BK-112 is generally recommended for applications such as automotive door lock components, housings, gears and electrical and mechanical components.

Data provided by Allied Signal.

Processing: To insure optimum part performance, this product must be dried prior to molding and maintained at a moisture level of less than 0.02%. Dehumidifying or desiccant dryers operating at 120 degC (248 degF) and 2 to 4 hours drying time is recommended.

Melt Temperature: 280-310 degC (536-590 degF). Mold Temperature: 100-110 degC (212-230 degF). Injection and Packing Pressure: 35-125 bar (500-1500psi) This product can be processed over mold temperatures of 80-120 degC (176-248 degF); however, for optimizing surface appearance, dimensional stability and part performance, mold surface temperatures of 100-110 degC (212-230 degF) are preferred. Injection pressure controls the filling of the part and should be applied for 90% of ram travel. Packing pressure affects the final part and can be used effectively in controlling sink marks and shrinkage. It should be applied and maintained until the gate area is completely frozen off. Back pressure can be utilized to provide uniform melt consistency and reduce trapped air and gas. A maximum of 3.5 bar (50 psi) is recommended to minimize glass fiber breakage. Fast fill rates are recommended to insure uniform melt delivery to the cavity and prevent premature freezing. Surface appearance is directly affected by injection rate.

Available Properties
  • Density
  • Viscosity Measurement
  • Linear Mold Shrinkage
  • Linear Mold Shrinkage, Transverse
  • Tensile Strength, Ultimate
  • Elongation at Break
  • Tensile Modulus
  • Flexural Modulus
  • Flexural Yield Strength
  • Poissons Ratio
  • Charpy Impact, Notched, Low Temp
  • Charpy Impact, Notched
  • CTE, linear 20°C
  • CTE, linear 20°C Transverse to Flow
  • Melting Point
  • Deflection Temperature at 0.46 MPa (66 psi)
  • Deflection Temperature at 1.8 MPa (264 psi)
  • Processing Temperature
  • Mold Temperature
  • Drying Temperature
  
Property Data

This page displays only the text
of a material data sheet.

To see MatWeb's complete data
sheet for this material (including
material property data, metal
compositions, material suppliers,
etc
), please click the button below.

<meta http-equiv=Content-Type content="text/html; charset=UTF-8">
请读关于材料数据的使用许可协议和我们的隐私权。询问或评论有关 MatWeb? 请与webmaster@matweb.com 联系。我们感谢您对 MatWeb的参与。

本站点由 Automation Creations, Inc. 设计和维护。这个网站的内容, MatWeb 的商标,与 "MatWeb" 由 Automation Creations, Inc.版权1996-2006拥有 。 MatWeb 意欲为个人使用 , 非商业用途。这个站点的内容、结果和技术数据,未经由 Automation Creations, Inc. 允许, 不可以被电子,摄影或实质上地再生产或自动化创作。