DSM Engineering Plastics Stanyl® TW300 (DAM) Nylon 46 Heat Stabilized, Lubricated (North America)
Subcategory: Nylon; Nylon 46; Polymer; Thermoplastic
Key Words: Polyamide 46
Material Notes: Information provided by DSM Engineering Plastics.
Physical Properties | Metric | English | Comments |
|
Density | 1.18 g/cc | 0.0426 lb/in³ | ISO 1183 |
Moisture Absorption at Equilibrium | 3.7 % | 3.7 % | 50% RH / 23°C; Similar to ISO 62 |
Mechanical Properties |
|
Tensile Strength, Yield | 100 MPa | 14500 psi | ISO 527-1/-2 |
Elongation at Yield | 40 % | 40 % | Nominal Strain at Yield; ISO 527-1/-2 |
Tensile Modulus | 3.3 GPa | 479 ksi | ISO 527-1/-2 |
Charpy Impact Unnotched | NB | NB | ISO 179/1eU |
Charpy Impact, Notched, Low Temp | 0.9 J/cm² | 4.28 ft-lb/in² | at -30°C; ISO 179/1eU |
Charpy Impact, Unnotched Low Temp | NB | NB | at -30°C; ISO 179/1eU |
Charpy Impact, Notched | 1.2 J/cm² | 5.71 ft-lb/in² | ISO 179/1eU |
Electrical Properties |
|
Volume Resistivity | 1e+013 ohm-cm | 1e+013 ohm-cm | IEC 60093 |
Dielectric Strength | 25 kV/mm | 635 kV/in | IEC 60243-1 |
Comparative Tracking Index | 400 V | 400 V | IEC 60112 |
Thermal Properties |
|
CTE, linear 20°C | 80 µm/m-°C | 44.4 µin/in-°F | parallel to flow; ISO 11359-1/-2 |
CTE, linear 20°C Transverse to Flow | 100 µm/m-°C | 55.6 µin/in-°F | ISO 11359-1/-2 |
Melting Point | 295 °C | 563 °F | ISO 11357-1/-3 |
Deflection Temperature at 1.8 MPa (264 psi) | 190 °C | 374 °F | ISO 75-1/-2 |
Flammability, UL94 | V-2 | V-2 | 0.75 mm |
|
Printer friendly version |
Some of the values displayed above may have been converted from their original units and/or rounded in
order to display the information in a consistant format. Users requiring more precise data for scientific or
engineering calculations can click on the property value to see the original value as well as raw conversions
to equivalent units. We advise that you only use the original value or one of its raw conversions in your
calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use
regarding this information. Click here to
view all the property values for this datasheet as they were originally entered into MatWeb.
|