DSM Arnitel® PL461 Injection Molding Grade Copolyester Elastomer (North America)
Subcategory: Elastomer, TPE; Polyester TPE; Polymer; Thermoplastic
Material Notes: Product description: Arnitel® combines the advantages of engineering thermoplastics, being easy to process with excellent mechanical properties, at the same time with the flexibility of rubbers. Arnitel does not require vulcanization. This leads to substantial reductions in part cost. Arnitel can be used over a wide range of temperatures. Arnitel has exceptional fatigue, creep resistance and resistance to oils, greases and many other chemicals. Characteristics of Arnitel: - Excellent strength over a wide range of temperatures
- Excellent dynamic properties e.g. creep and fatigue
- High heat resistance
- Exceptional resistance to oils and greases
- Good chemical resistance
- High degree of versatility in processing
- Easy coloring using masterbatches
- Surface quality from high gloss to textured
- Excellent heat resistance (long term 165°C)
- Good electrical insulation properties
- Low moisture absorption, excellent dimensional stability
- Easy flow, fast cooling times
Typical Applications: - Automotive: Arnitel® is extensively used in the automotive industry for applications requiring exceptional fatigue resistance and resistance to oil and greases. Examples are: Rack and Pinion Bellows, Constant Velocity Joint Boots (CVJ Boots), Air brake tubings.
- Arnitel in the Electronic and Consumer Goods Industry: Arnitel® finds enormous potential and is also widely used in the consumer electronics by some of the world's best companies. Arnitel® is the best choice for low noise gears where their exceptional processability without any defects such as flash, makes it the material solution of choice. Arnitel® is also used in highly demanding applications such as in mobile phone antennas.
Arnitel® has exceptional flexibility and can perform or even outperform functions that normally require conventional rubbers. Available in a wide range of hardnesses, Arnitel can replace metals, thermoplastics, leather and rubber, often with a reduction in finished part costs. Information provided by DSM.
No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.
Physical Properties | Metric | English | Comments |
|
Density | 1.21 g/cc | 0.0437 lb/in³ | ISO 1183 |
Melt Flow | 36.3 g/10 min | 36.3 g/10 min | Calculated from Volume Flow Rate of 30 cm3/10 min, 2.16 kg, 230°C; ISO 1133 |
Mechanical Properties |
|
Hardness, Shore D | 46 | 46 | 3 s; ISO 868 |
Tensile Strength at Break | 22.4 MPa | 3250 psi | ISO 527-1/-2 |
Tensile Strength, Yield | 12.4 MPa | 1800 psi | Stress at 50% Strain; ISO 527-1/-2 |
Tensile Strength, Yield | 13.7 MPa | 1990 psi | Stress at 100% Strain; ISO 527-1/-2 |
Tensile Strength, Yield | 5.3 MPa | 769 psi | Stress at 5% Strain; ISO 527-1/-2 |
Tensile Strength, Yield | 8.4 MPa | 1220 psi | Stress at 10% Strain; ISO 527-1/-2 |
Elongation at Break | 400 % | 400 % | ISO 527-1/-2 |
Tensile Modulus | 0.165 GPa | 23.9 ksi | ISO 527-1/-2 |
Izod Impact, Notched (ISO) | NB | NB | 23°C; ISO 180/1A |
Charpy Impact, Notched, Low Temp | NB | NB | -30°C; ISO 179/1eA |
Charpy Impact, Notched | NB | NB | 23°C; ISO 179/1eA |
Thermal Properties |
|
Melting Point | 220 °C | 428 °F | 10°C/min; ISO 11357-1/-3 |
Deflection Temperature at 0.46 MPa (66 psi) | 65 °C | 149 °F | ISO 75-1/-2 |
Descriptive Properties | |
High impact or impact modified | Yes | |
Injection Molding | Yes | |
Without fillers | Yes | |
|
Printer friendly version |
Some of the values displayed above may have been converted from their original units and/or rounded in
order to display the information in a consistant format. Users requiring more precise data for scientific or
engineering calculations can click on the property value to see the original value as well as raw conversions
to equivalent units. We advise that you only use the original value or one of its raw conversions in your
calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use
regarding this information. Click here to
view all the property values for this datasheet as they were originally entered into MatWeb.
|