SABIC Innovative Plastics LEXAN JK2500 Polycarbonate (North America)
Subcategory: Polycarbonate; Polymer; Thermoplastic
Close Analogs: Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics.
Material Notes: Information provided by GE Plastics for their North American product line.
Physical Properties | Metric | English | Comments |
|
Density | 1.31 g/cc | 0.0473 lb/in³ | ASTM D 792 |
Linear Mold Shrinkage | 0.0006 - 0.0015 cm/cm | 0.0006 - 0.0015 in/in | Flow, 0.125 inch; ASTM D 955 |
Linear Mold Shrinkage, Transverse | 0.002 - 0.004 cm/cm | 0.002 - 0.004 in/in | 0.125 inch; ASTM D 955 |
Melt Flow | 25 g/10 min | 25 g/10 min | 300C/1.2 kgf (O); ASTM D 1238 |
Mechanical Properties |
|
Tensile Strength, Ultimate | 63 MPa | 9140 psi | 5 mm/min; ISO 527 |
Tensile Strength @ Break | 63.8 MPa | 9250 psi | Type I, 0.2 in/min; ASTM D 638 |
Tensile Strength, Yield | 63 MPa | 9140 psi | 5 mm/min; ISO 527 |
Tensile Strength @ Yield | 63.8 MPa | 9250 psi | Type I, 0.2 in/min; ASTM D 638 |
Elongation at Break | 2.3 % | 2.3 % | 5 mm/min; ISO 527 |
Elongation at Break | 2.4 % | 2.4 % | Type I, 0.2 in/min; ASTM D 638 |
Elongation at Yield | 2.2 % | 2.2 % | 5 mm/min; ISO 527 |
Elongation at Yield | 2.3 % | 2.3 % | Type I, 0.2 in/min; ASTM D 638 |
Tensile Modulus | 11.13 GPa | 1610 ksi | 1 mm/min; ISO 527 |
Tensile Modulus | 11 GPa | 1600 ksi | 0.2 in/min; ASTM D 638 |
Flexural Modulus | 10.09 GPa | 1460 ksi | 2 mm/min; ISO 178 |
Flexural Modulus | 9.24 GPa | 1340 ksi | 0.05 in/min, 2" span; ASTM D 790 |
Flexural Strength | 110 MPa | 16000 psi | 2 mm/min; ISO 178 |
Flexural Strength | 112 MPa | 16300 psi | 0.05 in/min, 2" span; ASTM D 790 |
Flexural Yield Strength | 110 MPa | 16000 psi | 2 mm/min; ISO 178 |
Izod Impact, Notched (ISO) | 5.1 kJ/m² | 2.43 ft-lb/in² | 80*10*4 +23 C; ISO 180/ 1A |
Izod Impact, Unnotched | 2.24 J/cm | 4.2 ft-lb/in | 73F; ASTM D 4812 |
Izod Impact, Unnotched (ISO) | 15 kJ/m² | 7.14 ft-lb/in² | 80*10*4 +23 C; ISO 180/ 1U |
Gardner Impact @ 23°C | 14.7 J | 10.8 ft-lb | Instrumented Impact Total Energy, 73°F; ASTM D 3763 |
Izod Impact, Notched | 0.534 J/cm | 1 ft-lb/in | 73F; ASTM D 256 |
Electrical Properties |
|
Volume Resistivity | 2 ohm-cm | 2 ohm-cm | ASTM D 257 |
Surface Resistivity per Square | 10000 ohm | 10000 ohm | ASTM D 257 |
Thermal Properties |
|
CTE, linear 20°C | 80 µm/m-°C | 44.4 µin/in-°F | Flow, 23C-80C; ISO 11359-2 |
CTE, linear 68°F | 12.6 µm/m-°C | 7 µin/in-°F | Flow, -40F to 100F; ASTM E 831 |
CTE, linear 20°C Transverse to Flow | 77 µm/m-°C | 42.8 µin/in-°F | 23C-80C; ISO 11359-2 |
CTE, linear 68°F, Transverse to Flow | 63 µm/m-°C | 35 µin/in-°F | from -40F to 100F; ASTM E 831 |
Deflection Temperature at 0.46 MPa (66 psi) | 98.3 °C | 209 °F | 0.125 inch, unannealed; ASTM D 648 |
Deflection Temperature at 1.8 MPa (264 psi) | 93.9 °C | 201 °F | 0.125 inch, unannealed; ASTM D 648 |
Deflection Temperature at 1.8 MPa (264 psi) | 96.1 °C | 205 °F | 0.250 inch, unannealed; ASTM D 648 |
Vicat Softening Point | 100 °C | 212 °F | B/120; ISO 306 |
Vicat Softening Point | 111 °C | 232 °F | Rate B; ASTM D 1525 |
UL RTI, Electrical | 60 °C | 140 °F | UL 746B |
UL RTI, Mechanical with Impact | 60 °C | 140 °F | UL 746B |
UL RTI, Mechanical without Impact | 60 °C | 140 °F | UL 746B |
Flammability, UL94 | V-0 | V-0 | 0.039 in. |
Descriptive Properties | |
UL File Number, GLOBAL | E161759 | |
UL File Number, USA | E121562 | |
|
Printer friendly version |
Some of the values displayed above may have been converted from their original units and/or rounded in
order to display the information in a consistant format. Users requiring more precise data for scientific or
engineering calculations can click on the property value to see the original value as well as raw conversions
to equivalent units. We advise that you only use the original value or one of its raw conversions in your
calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use
regarding this information. Click here to
view all the property values for this datasheet as they were originally entered into MatWeb.
|