Physical Properties | Metric | English | Comments |
|
Density | 1.43 g/cc | 0.0517 lb/in³ | ASTM D 792 |
Density | 1.43 g/cc | 0.0517 lb/in³ | ISO 1183 |
Moisture Absorption at Equilibrium | 0.06 % | 0.06 % | (23 C / 50% RH) 1L; ISO 15512 |
Water Absorption at Saturation | 0.26 % | 0.26 % | 23C; ISO 62 |
Linear Mold Shrinkage | 0.004 - 0.008 cm/cm | 0.004 - 0.008 in/in | Flow; ASTM D 955 |
Linear Mold Shrinkage, Transverse | 0.006 - 0.01 cm/cm | 0.006 - 0.01 in/in | ASTM D 955 |
Melt Flow | 10 g/10 min | 10 g/10 min | cm3/10min; Melt Volume Rate, MVR at 265C/1.2 kg; ISO 1133 |
Mechanical Properties |
|
Hardness, H358/30 | 101 MPa | 14600 psi | ISO 2039/1 |
Tensile Strength, Ultimate | 85 MPa | 12300 psi | 5 mm/min; ISO 527 |
Elongation at Break | 3 % | 3 % | 5 mm/min; ISO 527 |
Tensile Modulus | 5.8 GPa | 841 ksi | 1 mm/min; ISO 527 |
Flexural Modulus | 4.7 GPa | 682 ksi | 2 mm/min; ISO 178 |
Flexural Strength | 135 MPa | 19600 psi | 2 mm/min; ISO 178 |
Izod Impact, Notched (ISO) | 6 kJ/m² | 2.86 ft-lb/in² | 80*10*4 +23 C; ISO 180/ 1A |
Izod Impact, Unnotched (ISO) | 20 kJ/m² | 9.52 ft-lb/in² | 80*10*4 +23 C; ISO 180/ 1U |
Izod Impact, Unnotched Low Temp (ISO) | 20 kJ/m² | 9.52 ft-lb/in² | 80*10*4 -30 C; ISO 180/ 1U |
Izod Impact, Notched, Low Temp (ISO) | 5 kJ/m² | 2.38 ft-lb/in² | 80*10*4 -30 C; ISO 180/ 1A |
Charpy Impact Unnotched | 2.5 J/cm² | 11.9 ft-lb/in² | 23C, Unnotch Edgew 80*10*4 sp=62; ISO 179/1eU |
Charpy Impact, Notched, Low Temp | 0.4 J/cm² | 1.9 ft-lb/in² | at -30C, V-notch Edgew 80*10*4 sp=62; ISO 179/1eA |
Charpy Impact, Unnotched Low Temp | 2.5 J/cm² | 11.9 ft-lb/in² | at -30C, Unnotch Edgew 80*10*4 sp=62; ISO 179/1eU |
Charpy Impact, Notched | 0.5 J/cm² | 2.38 ft-lb/in² | 23C, V-notch Edgew 80*10*4 sp=62; ISO 179/1eA |
Taber Abrasion, mg/1000 Cycles | 17 | 17 | CS-17, 1 kg; GE Test |
Electrical Properties |
|
Volume Resistivity | Min 1e+015 ohm-cm | Min 1e+015 ohm-cm | IEC 60093 |
Surface Resistivity per Square | Min 1e+015 ohm | Min 1e+015 ohm | ROA; IEC 60093 |
Dielectric Constant | 2.9 | 2.9 | 1 MHz; IEC 60250 |
Dielectric Constant | 3 | 3 | 50 Hz; IEC 60250 |
Dielectric Strength | 16 kV/mm | 406 kV/in | in oil, 3.2 mm; IEC 60243-1 |
Dissipation Factor | 0.001 | 0.001 | 50 Hz; IEC 60250 |
Dissipation Factor | 0.014 | 0.014 | 1 MHz; IEC 60250 |
Comparative Tracking Index | 300 V | 300 V | IEC 60112/3rd |
Thermal Properties |
|
CTE, linear 20°C | 55 µm/m-°C | 30.6 µin/in-°F | 23C-80C, flow; ISO 11359-2 |
CTE, linear 20°C Transverse to Flow | 85 µm/m-°C | 47.2 µin/in-°F | 23C-80C; ISO 11359-2 |
Thermal Conductivity | 0.19 W/m-K | 1.32 BTU-in/hr-ft²-°F | ISO 8302 |
Deflection Temperature at 0.46 MPa (66 psi) | 215 °C | 419 °F | HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm; ISO 75/Be |
Deflection Temperature at 1.8 MPa (264 psi) | 175 °C | 347 °F | HDT/Ae, 1.82 MPa Edgew 120*10*4 sp=100mm; ISO 75/Ae |
Vicat Softening Point | 195 °C | 383 °F | A/50; ISO 306 |
Vicat Softening Point | 200 °C | 392 °F | B/50; ISO 306 |
Vicat Softening Point | 215 °C | 419 °F | B/120; ISO 306 |
Flammability, UL94 | HB | HB | 1.5 mm |
Glow Wire Test | 750 °C | 1380 °F | Passes at 3.2 mm; IEC 60695-2-1 |
Descriptive Properties |
|
Ball Pressure Test, 125 C +/- 2 C | PASSES | IEC 60035-1 |
|
Printer friendly version |