BASF Elastollan® S64D Polyester Type Polyurethane Elastomer
Subcategory: Elastomer, TPE; Polymer; Polyurethane, TP; Thermoplastic
Key Words: TPU Rubbers
Material Notes: Recommended for injection molding. Elastollan S series of products are polyester-based thermoplastic polyurethanes that exhibit good hydrolytic stability. They also exhibit good oil, fuel and solvent resistance. These products can be injection and blow molded and extruded. As with all TPU products this grade must be dried prior to processing. Property values below are typical values based on test samples cured 20 hours at 100°C before testing. Information provided by BASF Corporation.
Click here to view available vendors for this material.
Physical Properties | Metric | English | Comments |
|
Density | 1.25 g/cc | 0.0452 lb/in³ | ASTM D792 |
Mechanical Properties |
|
Hardness, Shore D | 64 | 64 | ASTM D2240 |
Tensile Strength, Ultimate | 39 MPa | 5660 psi | ASTM D412 |
Tensile Strength, Yield | 27 MPa | 3920 psi | Tensile stress at 100% elongation.; ASTM D-412 |
Tensile Strength, Yield | 37 MPa | 5370 psi | Tensile stress at 300% elongation.; ASTM D-412 |
Elongation at Break | 380 % | 380 % | ASTM D412 |
Tear Strength | 220 kN/m | 1260 pli | ASTM D624 |
Taber Abrasion, mg/1000 Cycles | 50 | 50 | H-18 wheel; ASTM D-1044. |
Tensile Set | 135 % | 135 % | at break; ASTM D-412 |
|
Printer friendly version |
Some of the values displayed above may have been converted from their original units and/or rounded in
order to display the information in a consistant format. Users requiring more precise data for scientific or
engineering calculations can click on the property value to see the original value as well as raw conversions
to equivalent units. We advise that you only use the original value or one of its raw conversions in your
calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use
regarding this information. Click here to
view all the property values for this datasheet as they were originally entered into MatWeb.
|