Physical Properties | Original Value | Comments |
|
Density | 1.19 g/cc | ASTM D 792 |
Water Absorption | 0.13 % | 24 hours @ 73F; ASTM D 570 |
Linear Mold Shrinkage | 0.005 - 0.007 cm/cm | Flow, 0.125 inch; ASTM D 955 |
Melt Flow | 18.2 g/10 min | 300C/1.2 kgf (O); ASTM D 1238 |
Mechanical Properties |
|
Tensile Strength @ Break | 9400 psi | Type I, 2.0 in/min; ASTM D 638 |
Tensile Strength @ Yield | 8850 psi | Type I, 2.0 in/min; ASTM D 638 |
Elongation at Break | 125 % | Type I, 2.0 in/min; ASTM D 638 |
Elongation at Yield | 6.2 % | Type I, 2.0 in/min; ASTM D 638 |
Tensile Modulus | 348000 psi | 2.0 in/min; ASTM D 638 |
Flexural Modulus | 345000 psi | 0.05 in/min, 2" span; ASTM D 790 |
Flexural Yield Strength | 13500 psi | 0.05 in/min, 2" span; ASTM D 790 |
Gardner Impact @ 23°C | 640 in-lb | Instrumented Impact Total Energy, 73°F; ASTM D 3763 |
Gardner Impact @ 23°C | 675 in-lb | Instrumented Impact Total Energy, -22F; ASTM D 3763 |
Izod Impact, Notched | 14 ft-lb/in | 73F; ASTM D 256 |
Electrical Properties |
|
Comparative Tracking Index | 250 - 400 V | (+/- 0.125 inch); PLC Code 2; UL 746A |
Hot Wire Ignition, HWI | 30 - 60 sec | (+/- 0.125 inch); PLC Code 2; UL 746A |
High Amp Arc Ignition, HAI | 60 - 120 arcs | Surface (+/- 0.125 inch); PLC Code 1; UL 746A |
High Voltage Arc-Tracking Rate, HVTR | 25.4 - 80 mm/min | (+/- 0.125 inch); PLC Code 2; UL 746A |
Thermal Properties |
|
Deflection Temperature at 0.46 MPa (66 psi) | 275 °F | 0.125 inch, unannealed; ASTM D 648 |
Deflection Temperature at 1.8 MPa (264 psi) | 255 °F | 0.125 inch, unannealed; ASTM D 648 |
UL RTI, Electrical | 130 °C | UL 746B |
UL RTI, Mechanical with Impact | 130 °C | UL 746B |
UL RTI, Mechanical without Impact | 130 °C | UL 746B |
Flammability, UL94 | HB | 0.028 in. |
Descriptive Properties |
|
UL File Number, GLOBAL | E161759 | |
UL File Number, USA | E121562 | |
UV-light, water exposure/immersion | F2 | UL746C |
|
Printer friendly version |