SABIC Innovative Plastics LEXAN® 244R Polycarbonate, Unfilled, Injection Grade
Subcategory: Polycarbonate; Polymer; Thermoplastic
Close Analogs: Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics.
Material Notes: Data for 3.2 mm (1/8 in) samples unless otherwise noted. Data provided by GE Plastics.
No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.
Physical Properties | Original Value | Comments |
|
Density | 1.2 g/cc | ASTM D792 |
Water Absorption | 0.15 % | 24 hrs; 20°C; ASTM D570 |
Linear Mold Shrinkage | 0.005 - 0.007 cm/cm | 3.2 mm sample |
Melt Flow | 10.5 g/10 min | 300°C/1.2kg; ASTM D1238 |
Mechanical Properties |
|
Tensile Strength, Ultimate | 69 MPa | ASTM D638 |
Elongation at Break | 130 % | ASTM D638 |
Flexural Modulus | 2.3 GPa | 3.2 mm sample; ASTM D790 |
Flexural Yield Strength | 96 MPa | ASTM D790 |
Izod Impact, Notched | 8 J/cm | 3.2 mm sample; ASTM D256 |
Electrical Properties |
|
Electrical Resistivity | 1e+017 ohm-cm | ASTM D257 |
Dielectric Constant | 2.96 | 1 MHz; ASTM D150 |
Dielectric Constant, Low Frequency | 3.17 | 60 Hz; ASTM D150 |
Dissipation Factor | 0.01 | 1 MHz; ASTM D150 |
Dissipation Factor, Low Frequency | 0.0009 | 60 Hz; ASTM D150 |
Thermal Properties |
|
CTE, linear 20°C | 68 µm/m-°C | ASTM E831 |
Deflection Temperature at 0.46 MPa (66 psi) | 137 °C | 6.4 mm sample; ASTM D648 |
Deflection Temperature at 1.8 MPa (264 psi) | 132 °C | 6.4 mm (0.25 in.) sample; ASTM D648 |
Vicat Softening Point | 154 °C | 5 kg; ASTM D1525 |
UL RTI, Electrical | 130 °C | UL 746B |
UL RTI, Mechanical with Impact | 130 °C | UL 746B |
UL RTI, Mechanical without Impact | 130 °C | UL 746B |
Flammability, UL94 | V-2 | 1.5 mm |
|
Printer friendly version |
|