SABIC Innovative Plastics LEXAN® 3414 PC, 40% Glass Filler, Flame-Retarded
Subcategory: Filled/Reinforced Thermoplastic; Polycarbonate; Polymer; Thermoplastic
Close Analogs: Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics.
Material Notes: Data provided by GE Plastics. This product grade was removed from GE's database of standard products in 1998.
Physical Properties | Original Value | Comments |
|
Density | 1.52 g/cc | ASTM D792 |
Water Absorption | 0.12 % | 24 hrs at 23°C; ASTM D570 |
Linear Mold Shrinkage | 0.001 - 0.002 cm/cm | at 3.2 mm. |
Mechanical Properties |
|
Tensile Strength, Ultimate | 158 MPa | ASTM D638 |
Elongation at Break | 3 % | ASTM D638 |
Flexural Modulus | 9.646 GPa | ASTM D790 |
Flexural Yield Strength | 186 MPa | ASTM D790 |
Izod Impact, Notched | 1.33 J/cm | 23°C (73.4°F) |
Electrical Properties |
|
Electrical Resistivity | 1e+017 ohm-cm | ASTM D257 |
Dielectric Constant | 3.48 | 1 MHz |
Dielectric Constant | 3.53 | 60 Hz |
Dielectric Constant, Low Frequency | 3.53 | 60 Hz |
Dissipation Factor | 0.0013 | 60 Hz; ASTM D150 |
Dissipation Factor | 0.0067 | 1 MHz |
Dissipation Factor, Low Frequency | 0.0013 | 60 Hz |
Thermal Properties |
|
CTE, linear 20°C | 16 µm/m-°C | |
Deflection Temperature at 0.46 MPa (66 psi) | 154 °C | ASTM D648 |
Deflection Temperature at 1.8 MPa (264 psi) | 146 °C | ASTM D648 |
Vicat Softening Point | 165 °C | ASTM D1525 |
UL RTI, Electrical | 130 °C | |
UL RTI, Mechanical with Impact | 130 °C | |
UL RTI, Mechanical without Impact | 130 °C | |
Flammability, UL94 | V-1 | V-1 UL94 Rating, V-Series at 1.1 mm. |
Processing Properties |
|
Processing Temperature | 315 - 337 °C | melt temperature |
Mold Temperature | 82 - 115 °C | |
|
Printer friendly version |
|