BASF Luran 368 R SAN
Subcategory: Polymer; SAN Polymer; Thermoplastic
Material Notes: Information provided by BASF Corporation.
No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.
Physical Properties | Original Value | Comments |
|
Density | 1.08 g/cc | ISO 1183 |
Linear Mold Shrinkage | 0.005 cm/cm | MD; ASTM Test |
Melt Flow | 10 g/10 min | 220°C/10 kg; ISO 1133 |
Mechanical Properties |
|
Tensile Strength, Ultimate | 75 MPa | 5 mm/min; ISO 527 |
Tensile Strength, Yield | 75 MPa | 2 in/min; ASTM D638 |
Elongation at Break | 3 % | 5 mm/min; ISO 527 |
Elongation at Break | 3 % | 2 in/min; ASTM D638 |
Tensile Modulus | 3.7 GPa | 1 mm/min; ISO 527 |
Tensile Modulus | 3.8 GPa | ASTM D638 |
Flexural Strength | 125 MPa | ASTM D790 |
Charpy Impact Unnotched | 1.8 J/cm² | ISO 179 |
Charpy Impact, Unnotched Low Temp | 1.8 J/cm² | at -30°C; ISO 179 |
Charpy Impact, Notched | 0.2 J/cm² | ISO 179 |
Tensile Creep Modulus, 1 hour | 3500 MPa | ISO 899 |
Tensile Creep Modulus, 1000 hours | 2800 MPa | ISO 899 |
Izod Impact, Notched | 0.15 J/m | ASTM D256 |
Electrical Properties |
|
Volume Resistivity | Min 1e+013 ohm-cm | IEC 60093 |
Surface Resistance | Min 1e+013 ohm | IEC 60093 |
Dielectric Constant | 2.7 | 1 MHz; IEC 60250 |
Dielectric Constant | 3 | 100 Hz; IEC 60250 |
Dielectric Strength | 34 kV/mm | IEC 60243-1 |
Dissipation Factor | 0.004 | 100 Hz; IEC 60250 |
Dissipation Factor | 0.007 | 1 MHz; IEC 60250 |
Comparative Tracking Index | 425 V | IEC 60112 |
Thermal Properties |
|
CTE, linear 20°C | 70 µm/m-°C | Parallel; ISO 11359 |
Deflection Temperature at 0.46 MPa (66 psi) | 102 °C | Annealed; ASTM D648 |
Deflection Temperature at 0.46 MPa (66 psi) | 102 °C | ISO 75 |
Deflection Temperature at 1.8 MPa (264 psi) | 98 °C | ISO 75 |
Deflection Temperature at 1.8 MPa (264 psi) | 98 °C | Annealed; ASTM D648 |
Vicat Softening Point | 106 °C | (50 °C/h / 50N) - B/50; ISO 306 |
Vicat Softening Point | 106 °C | Rate "A" Loading 1 (50 degC/h 10N); ASTM D1525 |
Oxygen Index | 18 % | ISO 4589-1/-2 |
Optical Properties |
|
Transmission, Visible | 90 % | Thickness Unknown |
Processing Properties |
|
Melt Temperature | 250 °C | Injection molding |
Mold Temperature | 60 °C | Injection molding |
Mold Temperature | 98 °C | Ejection temperature |
Fill Speed | 200 mm/sec | Injection molding |
Descriptive Properties | |
Additive | Unfilled | |
Color | Clear | |
Commercial Status (March 2007) | North America and Europe | |
FDA | Yes | |
Form | Pellets | |
Impact Modified | No | |
Injection molding | Processable | |
NSF Std. 51 | No | |
NSF Std. 61 | No | |
Other extrusion | Processable | |
Primary Processing Technique | Extrusion | |
Profile extrusion | Processable | |
Sheet extrusion | Processable | |
Thermoforming | Processable | |
UL.UL-C | Yes | |
|
Printer friendly version |
|