|   Carpenter Hiperco® Alloy 50 Fe-Co-V Soft Magnetic Alloy, 0.35 mm Strip Heat Treated 760°C  Subcategory: Electronic/Magnetic Alloy; Cobalt Alloy Key Words: ASTM A801 Alloy Type 1; Mil-A-47182; Carpenter Technology Corporation, Carpenter Steel Division; Cartech Material Notes: Iron content calculated as remainder.
 Hiperco® alloy 50 is an iron-cobalt-vanadium soft magnetic alloy which exhibits high magnetic saturation (24 kilogauss), high D.C. maximum permeability, low D.C. coercive force, and low A.C. core loss.  This alloy is produced in strip form only and contains a small niobium addition for grain refinement during mill processing and final heat treatment of strip. Hiperco alloy 50 strip has been used primarily in the manufacture of rotor and stator laminations in motors and generators for aircraft power generation applications.  These laminations are stamped from cold rolled strip and must be final annealed in a protective atmosphere or vacuum environment at a temperature which will provide and optimum combination of mechanical and magnetic properties to withstand the high stresses encountered in service. Hiperco 50 has the same nominal composition as Vanadium Permendur and Permendur V. Hiperco® is a registered trademark of Carpenter Technology Corporation.  Data provided by Carpenter Technology Corporation. 
| | 
    | Available Properties |  
    | DensityTensile Strength, UltimateTensile Strength, YieldElongation at BreakModulus of ElasticityElectrical ResistivityCurie TemperatureCTE, linear 20°CCTE, linear 250°CCTE, linear 500°CThermal Conductivity
 | 
 | 
 |  | | 
    | Property Data |  
    | 
    This page displays only the textof a material data sheet.
 
 To see MatWeb's complete data
 sheet for this material (including
 material property data, metal
 compositions, material suppliers,
 etc), please click the button below.
 |  
    |  | 
 | 
 | 
 |