Quadrant EPP Monocast® MC 904P Nylon for Pile Driver Pads
Subcategory: Nylon; Thermoplastic
Close Analogs: Quadrant purchased DSM Engineering Plastics Products in 2001.
Key Words: MC Nylon; Polyamide
Material Notes: Pile driver pads are used to prevent damage to the pile and the piling hammer. Fillers are usually made of hardwood - Azobe, for example. The disadvantage of Azobe is the 30-40% energy loss and its relatively short useful life. Azobe is also difficult to remove from the piling pad. Monocast® pile driver pads last much longer, are easy to replace, are versatile (diesel hammer, steam hammer, prefab-piling, and vibro-piling), has the right elasticity to transmit the blow without damaging the pile or piling hammer. With MC® 904P's unique properties (coefficient of restitution with computations is 0.904; deformation under load at 122°F (50°C) 2000 psi (13.8 MPa) is 0.6% per ASTM D621), less energy is lost so piles can be driven faster with greater force. Information provided by Quadrant Engineering Plastic Products (formerly DSM EPP).
Available Properties |
- Density
- Water Absorption
- Water Absorption at Saturation
- Hardness, Rockwell M
- Hardness, Rockwell R
- Tensile Strength, Ultimate
- Elongation at Break
- Modulus of Elasticity
- Izod Impact, Notched
- Charpy Impact, Notched
- Melting Point
|
|
|
|
Property Data |
This page displays only the text
of a material data sheet.
To see MatWeb's complete data
sheet for this material (including
material property data, metal
compositions, material suppliers,
etc), please click the button below. |
|
|
|
|