DuPont Kapton® 500HN Polyimide Film, 125 Micron Thickness
Subcategory: Polyimide, TS; Thermoset; Polymer
Material Notes: Film thickness 125 micron (5.0 mil) All purpose polyimide film. Can be laminated, diecut, slit, formed, or adhesive-coated. Available in thicknesses from 0.3 mil (7.5 µm) to 5 mil (125 µm). General Kapton® information: Kapton® is synthesized by polymerizing an aromatic dianhydride with an aromatic diamine. It has excellent chemical resistance; there are no known organic solvents for the film. It does not melt. It can be used at both high and low temperature extremes. Kapton® polyimide films can be used in a variety of electrical and electronic uses: wire and cable tapes, formed coil insulation, substrates for printed circuit boards, motor slot liners, magnet wire insulation, transformer and capacitor insulation, magnetic and pressure-sensitive tapes, and tubing. Data provided by DuPont High Performance Films.
Available Properties |
- Density
- Water Absorption
- Moisture Absorption at Equilibrium
- Moisture Vapor Transmission
- Oxygen Transmission
- Film Tensile Strength at Yield, MD
- Film Tensile Strength at Break, MD
- Film Elongation at Break, MD
- Poissons Ratio
- Secant Modulus
- Impact Test
- Coefficient of Friction
- Coefficient of Friction, Static
- Electrical Resistivity
- Dielectric Constant
- Dielectric Constant, Low Frequency
- Dielectric Strength
- Dissipation Factor
- Dissipation Factor, Low Frequency
- CTE, linear 20°C
- CTE, linear 100°C
- CTE, linear 250°C
- Specific Heat Capacity
- Thermal Conductivity
- Maximum Service Temperature, Air
- Minimum Service Temperature, Air
- Glass Temperature
- Flammability, UL94
- Refractive Index
|
|
|
|
Property Data |
This page displays only the text
of a material data sheet.
To see MatWeb's complete data
sheet for this material (including
material property data, metal
compositions, material suppliers,
etc), please click the button below. |
|
|
|
|