MatWeb - Material Property Data 用 MatWeb 登广告!    Register Now
越过59,000 以上, 金属、塑料、陶瓷和合成物的数据资料库。
MatWeb - Material Property Data 主页  •  搜寻  •  工具  •  供应商  •  文件夹  •  有关我们  •  常用问题  •  登录   •  English English English 
  搜寻方法:  高级先进 | 材料类型 | 特性 | 构成份  | 商标  | 制造商
    Search

Subscribe to FREE Trade Publications!

Ferro HPP35GS01BK 35% Talc Fiberglass/Mica Reinforced, Chemically-Coupled, Heat-Stabilized, Impact-Modified Polypropylene

 

Subcategory: Polypropylene; Thermoplastic; Polymer

Material Notes:
35% Talc Fiberglass/Mica Reinforced, Chemically-Coupled, Heat-Stabilized, Impact-Modified Polypropylene

Description:

Applications: Primary use is for rear quarter wheel opening shields

Specifications: Meets/exceeds Ford Engineering Material Specification ESB-M4D640-A.

Comments:
Tensile/Izod Change (1000 hrs./140°C): +8/-3%; ESB-M4D640-A Specification: ±15/-15; ISO 188
Filler Content: 34.5 %; WSB-M4D640-A Specification: 33.0-37.0; ISO 3451/1A
Material Pre-dry: Normally it is not necessary to pre-dry this material. However, if conditions dictate drying to optimize material properties and part appearance then dry in a desiccant dryer at 180°F for 2-3 hours or 160°F for >4 hours.
Manifolds: Maintain manifolds, runners and tips 10 to 20°F above the front one temperature to allow easier filling. (Gate drool is best eliminated using screw decompression rather than reducing tip temperature.)
Back Pressure (Range): 20-50 psi. Injection Speed: medium to slow > depending on surface appearance. Screw Speed: medium. Injection Pressure: Adjust to just above a short shot. Injection Time: Adjust to just above a short shot- Weigh pars for consistent packing. Cushion (Range): 0.2-0.5 in. Nozzle Type: Free flowing/Standard.
Some conditions may have to be altered to obtain acceptable parts. back pressure must be minimized to retain fiber length and optimize performance. Please do not run too cold, molded in stress & rough surface may become a problem. If you must run below melt or temperature recommended for dimensional precision you may compromise impact and esthetics. Retest parts to confirm performance.

Data provided by Ferro Corporation - Specialty Plastics Group.

Available Properties
  • Density
  • Linear Mold Shrinkage
  • Melt Flow
  • Tensile Strength, Ultimate
  • Flexural Modulus
  • Izod Impact, Notched (ISO)
  • Izod Impact, Notched, Low Temp (ISO)
  • Deflection Temperature at 0.46 MPa (66 psi)
  • Deflection Temperature at 1.8 MPa (264 psi)
  • Rear Barrel Temperature
  • Middle Barrel Temperature
  • Front Barrel Temperature
  • Nozzle Temperature
  • Mold Temperature
  • Drying Temperature
  • Dry Time
  
Property Data

This page displays only the text
of a material data sheet.

To see MatWeb's complete data
sheet for this material (including
material property data, metal
compositions, material suppliers,
etc
), please click the button below.

<meta http-equiv=Content-Type content="text/html; charset=UTF-8">
请读关于材料数据的使用许可协议和我们的隐私权。询问或评论有关 MatWeb? 请与webmaster@matweb.com 联系。我们感谢您对 MatWeb的参与。

本站点由 Automation Creations, Inc. 设计和维护。这个网站的内容, MatWeb 的商标,与 "MatWeb" 由 Automation Creations, Inc.版权1996-2006拥有 。 MatWeb 意欲为个人使用 , 非商业用途。这个站点的内容、结果和技术数据,未经由 Automation Creations, Inc. 允许, 不可以被电子,摄影或实质上地再生产或自动化创作。